So I grabbed some tow hooks from the junkyard and I was wondering of anyone's ever done it. I plan on either sticking them right into the frame with the bolts from the jimmy of course doing some grinding first. But something like this:
http://s1274.beta.photobucket.com/us...DF158.jpg.html

Plan on cutting and sanding holes on the bumper. But I was wondering of anyone has taken This road. the hooks will work like this right, screwed right into the frame just like the truck they came off of?

 

Nope frames to thin they just tear out i did install a set under the sway bar mount its thicker there but only use in easy pulls nothing mind jarring ******* .

 

Heres what i did .....https://www.cherokeeforum.com/f2/che...y-hooks-67388/

 

I don't see the problem really my brother has a front trailer hitch mounted to the same arms and has a winch on it pulls w. no problem. What if I weld it in

 

Then go for it man.

 

off topic, but that's a pimp lookin' 300zx you've got

 

Figure somethin out. If all else fails I just get a schmitybuilt front bumper lol.

Who? That's the car I wanna get lol. Once I sell my f150 I'll be buying one. And I'll have my jeep and a 300 and be completely happy haha

 

These are pulling evenly on both sides at once the single hook would be only one side .

 

Hook on both sides and a row rope that connects the hooks lol.

I'm probably going to get a hitch or a new heavy duty bumper. But I gotta get my lift first.

 

So how did these hold up?

 

I had to replace a harmonic balancer in one, guy made me abit upset, he ran the thing to the dirt. then about 5 months ago he took it to the scrap yard got a whopping $164 for it.