When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go hereXJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.
I'm removing the old soft lines on both sides of the fuel filter to replace and I'm not sure if this is a place where a disconnet tool is needed or if it just pulls off. When the PO had the pump replaced the person used stainless braided hose. What is the correct size hose? Thanks in advance.
1996 Jeep Cherokee 4.0
Last edited by Spencer_P; Sep 9, 2020 at 07:47 PM.
No disconnect is needed. 3/8 and 5/16 are the correct sizes. I got two feet of each, would've been fine with one foot of 5/16 as I only used about 3 inches. Here's everything I used.
Fuel hard line to fuel filter soft line
