Front driveshaft
Thread Starter
Member
Joined: Mar 2009
Posts: 227
Likes: 0
From: stratford nj
Year: 97
Model: Cherokee
Engine: 4.0
ok i been lookn for the vibe in my front end for A lil bit now tried tires still the same new track bar same ,new bushing everywhere same, new axle ujoints still the same,, i take my front drive shaft out the vibes are all gone, the ujoints all seem fine in the DS, the only thing i see is at the slip there is about an 1/8" side to side play, could this be my vibe? or could the DS bent?,, it only has a 3" lift with 31, all terrains,,
Might also check your pinion angle, but at that much lift if you're using stock control arms that's probably not it. Just another thing to check though.
Last edited by Enjoytheride; Sep 25, 2010 at 04:51 PM. Reason: oops, my bad, pinion is changed by uppers, not lowers
Thread Starter
Member
Joined: Mar 2009
Posts: 227
Likes: 0
From: stratford nj
Year: 97
Model: Cherokee
Engine: 4.0
i did a 1" TC drop everything on the DS seems tight all but the slip has the movement, im gonna see if i can get another one from a buddy to try who knows i guess,
CF Veteran
Joined: Feb 2010
Posts: 5,420
Likes: 0
From: Soddy Daisy TN
Year: 97
Model: Cherokee
Engine: 4.0L
T-case drop puts the front drive shaft in more of an angle and if it isn't balanced perfectly you will get vibes. That's why t-case drops are a band aid for SYEs.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jethro4days
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Sep 5, 2015 08:29 PM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 3, 2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



