99 XJ
I am trying to get my factory lfog lights working and I need a few suggections on where to go next.
I am getting about 11.0 volts at the bulb when the switch is on and the light in the switch does not work.
What should I check next?
I am trying to get my factory lfog lights working and I need a few suggections on where to go next.
I am getting about 11.0 volts at the bulb when the switch is on and the light in the switch does not work.
What should I check next?
Well I cleaned the switch up per this thread.
https://www.cherokeeforum.com/f51/fo...repair-109808/
Kind of helped but my switch is pretty melted and the little bar doesn't really slide freely in the plastic. I scraped a little with a small knife on the plastic but it didn't help much. looks like Im ready for a new switch.
I shorted out the two middle connectors on the wiring harness but still no lights.
I took the lights apart and they were rusted pretty bad as well. I cleaned them up as best I could and finally got then working but not too reliably.
I think to fix this for good I need a new switch and new lights.
https://www.cherokeeforum.com/f51/fo...repair-109808/
Kind of helped but my switch is pretty melted and the little bar doesn't really slide freely in the plastic. I scraped a little with a small knife on the plastic but it didn't help much. looks like Im ready for a new switch.
I shorted out the two middle connectors on the wiring harness but still no lights.
I took the lights apart and they were rusted pretty bad as well. I cleaned them up as best I could and finally got then working but not too reliably.
I think to fix this for good I need a new switch and new lights.
Member
Quote:
https://www.cherokeeforum.com/f51/fo...repair-109808/
Kind of helped but my switch is pretty melted and the little bar doesn't really slide freely in the plastic. I scraped a little with a small knife on the plastic but it didn't help much. looks like Im ready for a new switch.
I shorted out the two middle connectors on the wiring harness but still no lights.
I took the lights apart and they were rusted pretty bad as well. I cleaned them up as best I could and finally got then working but not too reliably.
I think to fix this for good I need a new switch and new lights.
Went thru same process. My switch was ok after cleaning but one lamp was shot. $30 bucks on ebay, rockauto has em' too. Now I have foglamps.Originally Posted by rshackleford
Well I cleaned the switch up per this thread.https://www.cherokeeforum.com/f51/fo...repair-109808/
Kind of helped but my switch is pretty melted and the little bar doesn't really slide freely in the plastic. I scraped a little with a small knife on the plastic but it didn't help much. looks like Im ready for a new switch.
I shorted out the two middle connectors on the wiring harness but still no lights.
I took the lights apart and they were rusted pretty bad as well. I cleaned them up as best I could and finally got then working but not too reliably.
I think to fix this for good I need a new switch and new lights.
Got a link to the light you bought on Ebay? I was looking at some 2X6" kcs but I'm not sure how well they will mount
Member
Quote:
www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130635946315&fits=Year %3A1998%7CMake%3AJeep%7CModel%3ACherokee&_trksid=p 2042998.m1253Originally Posted by rshackleford
Got a link to the light you bought on Ebay? I was looking at some 2X6" kcs but I'm not sure how well they will mount
Bolt in replacement. Could not tell you how long it will last but appeared made well enough and fit perfect. I have no complaints. Free ship.