Can someone out there send me a pic of how the exaust is supported were it crosses over the transmission support cross member. My exaust pipe is resting on the crossmember and makes a horrible knocking sound all the time. I can see a support bracket on the crossmember with a rubber bushing but it is under the pipe and I am not sure how it can be used..Thanks

 

mine was doing that, then i put my jack under it and jacked it up and it stayed....lol. didnt mess anything up

 

Here you go...

 

havin the same problem but only in gear, with breaks applied at dead stop.

 

Hammer....

 

Lol... Mine was doing that. Went like that for mos! So annoying! Went to muffler shop and they fixed it w/a new hanger. Best $20 I spent in a loong time.

 

Thanks allot now I see what it is supposed to look like.

 

mines been doing that to.. thanks for the picture that definitely helps!
-Jim

 

The original muffler had a bigger diameter brace going from it into the rubber hole. That is why the diameter of the two are different. I had to bend the brace up to keep mine off the crossmember also.
I took the crossmember off to do that...

 

A new hanger huh? That sounds like a good idea.
But I think I will do something myself, eaiser and I
Know what I did.

 

Mine was doing this till I noticed that the rear hanger had rusted off the tail pipe. I bolted on one of the generic replacement import pins to go in the rubber. Snugged it up. No more noise.

 

When I removed my t-case drop, I had an issue as well. BFW!

 

Quick method is a sawzall... right before your um... you know that one thing that starts with a c that has an unmentionable name.... Then replace it with a cherry bomb and a homemade hanger. not a lot of $ and a cool reward. haha not really... Oreilly Auto parts has a whole assortment of universal hangers. I used one that looks kind like an L with an extra hook and a pipe clamp. Pretty easy to fix yourself if you have the correct tools.