double shear track bar
Thread Starter
Junior Member
Joined: Feb 2010
Posts: 32
Likes: 0
From: fishers, in
Year: 1995
Model: Cherokee
Engine: 4.0
double shear track bar
i just installed a 5.5 inch lift on my jeep today and it came with a double shear track bar and i was wondering how you know its adjusted to the right length. if i dont have it right can a normal shop adjust it when i get a alignment? thanks. here is a pic after it was all finished up
Last edited by warped156; Mar 14, 2010 at 04:20 AM.
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
With the trackbar disconnected from the frameside mount, turn the steering wheel to move the boby over the axle. Once you've centered the body over the axle, adjust the trackbar accordingly and install.
You'll need to adjust your draglink afterwards to re-center the steering wheel.
You'll need to adjust your draglink afterwards to re-center the steering wheel.
::CF Administrator::
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
With the trackbar disconnected from the frameside mount, turn the steering wheel to move the boby over the axle. Once you've centered the body over the axle, adjust the trackbar accordingly and install.
You'll need to adjust your draglink afterwards to re-center the steering wheel.
You'll need to adjust your draglink afterwards to re-center the steering wheel.
Exact method I used.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 21, 2015 12:13 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Sep 19, 2015 07:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
