On the passenger side, where exactly is the axle seal located. Is it next to the vacuum motor assembly or on the end of the axle assembly next to the outer u-joints? I need to replace mine. I understand the seals are referred to as intermident seal.

 

If its a CAD D30 its located in the vac-disconnect housing.
Non-CAD, would be in the diff housing across from the driver-side seal.

 

Cad 30? I have a 1988 Cherokee with a vacuum release motor on the passenger side.

 

Yup C,A,D,: Central Axle Disconnect.

 

How hard is it to replace? I know you have to remove the vacuum motor assembly. What do you use to remove the old seal and install the new one?

 

Bye the way, I had pulled the axle to replace the u-joints on the passenger side several weeks ago. I know I'll have to pull the axle again.

 

Its a bear to replace, but possible.
https://www.cherokeeforum.com/f2/rep...uestion-81612/
http://www.jeepforum.com/forum/f12/r...dache-1171081/
Here's some ideas.

 

http://go.jeep-xj.info/HowtoD30AxlesSeals.htm