Cursed Transfer Case Question
#1
Thread Starter
Newbie
Joined: Feb 2020
Posts: 5
Likes: 1
From: Milwaukee, WI
Year: 1987
Model: Cherokee (XJ)
Engine: STRAIGHT SIXXX
Cursed Transfer Case Question
Hi all, new to the forum but I figured an online forum would simply the best place to get this question answered. I have an ‘87 XJ with a 242 transfer case that had a disagreement with a boulder in a river and has a giant hole in it (no bueno). However, I have a 231 out of a later model XJ (mid-90s) that I can rebuild and put in (bueno). I know the 231 is the Chad transfer case but, since I live in the Midwest and most of my drive time is on the slick streets of Milwaukee, I’d like to keep the part-time functionality for the sake of drivability. I’m planning on building the t-case from scratch anyway so my question is would I run into any issues essentially building a 242 in a 231 case? Would all the 242 bits fit and function in the stripped out shell of a 231 or are there differences in internal measurements and such that make it incompatible? They look pretty similar but I would rather get some advice than pay for two rebuild kits. Thanks!
Since I’m new here, here’s a picture of the “Heep” for your viewing pleasure. The rattle can paint job happened before my time so no flexes will be found here.
Since I’m new here, here’s a picture of the “Heep” for your viewing pleasure. The rattle can paint job happened before my time so no flexes will be found here.
Last edited by IdiotWithASocketSet; 02-07-2020 at 05:23 PM.
#2
If I was you, I would purchase a used 242 from a junkyard Cherokee and use that.
My spare cost $75 (same year '96)..another fellow wanted $120 for one that "needed a rebuild"..I offered him $30, which he declined
(they were local XJ owners who were getting out of XJs, and wrecking or selling off parts)
My spare cost $75 (same year '96)..another fellow wanted $120 for one that "needed a rebuild"..I offered him $30, which he declined
(they were local XJ owners who were getting out of XJs, and wrecking or selling off parts)
#3
CF Veteran
Joined: Nov 2015
Posts: 3,624
Likes: 463
From: Southern OH
Year: 1997
Model: Cherokee(XJ)
Engine: 4.0
The np231 is a only has part time 4x4, and 2wd, the np242 has full time 4x4 that can be used on the street. However in slick conditions there is no problem with using the np231 part time 4x4 on the street. My vote would be to install the np231 that your have.
#4
Old fart with a wrench
Joined: Nov 2010
Posts: 14,398
Likes: 729
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
I agree with 00t444e, but I will say that once you experience a 242, a 231 is a letdown. Install the 231, then you can decide later if you want to redo the 242.
Thread
Thread Starter
Forum
Replies
Last Post
kandia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
01-26-2012 08:57 PM
Cherokeejemo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
07-21-2011 12:04 AM
Mountain
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
02-27-2011 03:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)