Crank Sensor and NSS
01-11-2016, 09:57 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: Lansing, IL
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Crank Sensor and NSS
Does the 2 bolts that hold the crank sensor to the trans need to be all the way tightened? I was going to swap out the sensor but didnt do it, i loosened the 2 bolts up but not all the way, will that def. cause a no start?
So I read a detailed article on the diff year aw4 swapout's for the xj and so i put a 96 aw4 and motor in my 97 xj, replaced the nss with a 97-01 model because it had diff color wires and count of wires and a diff shaped pigtail connector. Can you do this? Will the trans read the diff year nss? Or should I be fine?
So I read a detailed article on the diff year aw4 swapout's for the xj and so i put a 96 aw4 and motor in my 97 xj, replaced the nss with a 97-01 model because it had diff color wires and count of wires and a diff shaped pigtail connector. Can you do this? Will the trans read the diff year nss? Or should I be fine?
01-12-2016, 07:11 AM
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,863
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
They need to be tight......
Thread
Thread Starter
Forum
Replies
Last Post
trap25
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-11-2016 10:36 AM
Kung Fuhrer
Modified XJ Cherokee Tech
6
01-08-2016 06:32 PM
98redjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-07-2016 12:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
