Was finally a proud owner of a 1995 xj. That pride has been cancelled out by this fender bender, 100% my fault, not a good story.

Still runs good. Only damage was a turn signal cover/bulb and this bracket that I want to ID and study before searching a salvage yard for replacement.

Can anyone ID this part? Thanks!

 

Power steering pump bracket. Looks like you will need a bumper and brackets and a header panel also.

 

A 13mm racheting combo wrench will save your sanity when replacing that PS bracket.

 

Pretty sure this is what you are looking for. Part # 5300 7616. # 4 on the screen shot. Junk yard would probably be your best bet. My parts catalogs get a little confusing but it looks like any Jeep from '91 to '96 with a 4.0 will have what you need. Also it appears this might be what you want to:

http://www.oconeeoffroad.com/Omix-AD..._p_123479.html

Now that is pretty pricey. Also since there are no pictures it is tough to be sure. But I can tell you this. I have ordered stuff from this site. Smaller less expensive stuff. Was not really sure it would be what I wanted but was every time. Great site for the little weird stuff for Jeep.

If you click on the screen shot it will become bigger and readable.

 

A junkyard is your best bet.

If it's not too bad you might just take your old one off and be able to weld it.
What I would do (if you have another vehicle) is take yours apart, take it to a welder and see if it's repairable and get a price. Then check your local JY and see if there's a 91-96 you can pull the part from. Decide what's better for you, repair or pull from JY.
You probably can find the bracket and some or all of the other stuff at the JY and get it all at once.