I've been looking for front end parts for my 1995 Xj for a while and I have found a 1990 model and was wondering if all the front end parts will interchange between these two. Anyone ever swapped them out? Thanks in advance. -Shawn

 

stay away from the vaccum disconnect dana 30. You will know its a disconnect axle by looking at the passenger side of the axle there will be a goofy box mounted on the axle tube.

 

i believe they should be as long as it is not the vacuum pump axle disconnect model.

 

yea its a bolt in. everything is the same size.

 

I'm mainly needing body parts and not anything mechanical except an ac compressor maybe. Thanks for all the help. -Shawn

 

oh every thing is the same body wise.

 

Everything, body panels, suspension, drivetrain. Everything from the 90 XJ you have will bolt onto your 95.

 

Does anyone know if the ac compressor will interchange?

 

If you use all the 90 parts then you can swap on your 95. This includes the header panel, grill and headlight surrounds. But 90 and 95 do have differences in the moldings of these parts, you cant mix these years/parts.

The 90 XJ will be R12 refrigerant and the 95 will be R134. You may be able to convert the 90 compressor to R12 if all the fittings are in the same location. You'll have to visually check... unless someone here knows offhand.