I feel really dumb asking the question but here it is.. what is a good fuse to steel power off? I looked in the box (01 Classic) on the passenger side. lots of minis and a couple normal 25's. If i remember from a long time ago battery power and ground make for alot of noise interference? Or Battery best spot? I cant remember..

 

Your best bet would run a new line with a fuse from the battery. I really don't know if you would need a relay.

 

Got it. I found a diagram and stole it of a 15amp towing fuse. I dont have tow pkg so it was ok.. Thanks!!

 

you should replace that fuse with a 2amp.

 

I just finished my install. I used a fuse tap that plugs into the interior fuse block.

 

x2 use these on constant hot side of fuse along with fuse supplied with cb good to go

 

What is the amp rating on the stock cb fuse? 15 way to high?

 

It should be a 5amp fuse thats in the inline fuse that came with the cb. I also run my power from a spare port in the fuse panel and I have a 2amp. No issues at all.