My right front brake caliper was sticking I bought both front and installed them. I couldn't bleed them after that so I thought the master cylinder was bad and replaced that. They still won't bleed. I get it so they are good while pumping the brakes but after they sit for a minute the peddle drops down to the floor. Neither me or my dad can figure it out plz help. Thanks

 

Is fluid coming out of the nipples/bleeders?

 

Describe cant bleed?

 

.

 

.. ?

 

Got them on the wrong sides? Bleeders on the bottom instead of the top where they're supposed to be?

 

!

 

Uh-oh. I sense a punctuation war brewing.............

 

&

 

I can't get all the air out.

 

What's the method you're using? You could not be bleeding the right way in the first place. Use the 4 bottle system.

 

What he said. You want the bleeder valve on the top. It sounds like you may have the right caliper on the left side and the left side on the right side.

Can you take a picture and post it?

 

Yes

 

What about the bleeders?.........top or bottom?

 

x2 is cruiser correct its been done many times .