Budget Builds: What Junkyard Parts Will Fit Cherokee?
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
I would. I wish I had before installing mine since it has a slow leak from the input.
At least replace the seals for peace of mind.
At least replace the seals for peace of mind.
Senior Member
Joined: Jul 2010
Posts: 997
Likes: 1
From: Long Island NY
Year: 2000
Model: Cherokee
Junior Member
Joined: Nov 2012
Posts: 56
Likes: 0
From: Center of H$^^, CA
Year: 1988
Model: Comanche
Engine: AMC 150
Injectors
I have been following this thread for a while, I just registered today. My Brother-in-law and I have been searching up and down for "neon" injectors the 703-EV1 injectors. We searched 3 or 4 dozen neons with no luck. Today we decided to check sratus' and we hit pay dirt, almost every stratus with an l4 that was EV1 had 703s in them. There in the soak ready to get cleaned up and tried on for size.
Member
Joined: Nov 2009
Posts: 153
Likes: 0
Model: Cherokee
Originally Posted by IdleSerivice
I have been following this thread for a while, I just registered today. My Brother-in-law and I have been searching up and down for "neon" injectors the 703-EV1 injectors. We searched 3 or 4 dozen neons with no luck. Today we decided to check sratus' and we hit pay dirt, almost every stratus with an l4 that was EV1 had 703s in them. There in the soak ready to get cleaned up and tried on for size.
Seasoned Member
Joined: Dec 2010
Posts: 275
Likes: 0
From: Castle Rock
Year: 1992
Model: Cherokee
Engine: 4.0 high output
So these dont work, because of the angle they come out at, spent 2 hours yesterday trying to figure how to put these in. Finally got then close enough to bolt them in, but they would get stuck on the shock mount above the control arm.
10. JK rear UCA = use as XJ LCA, its about 1-2" longer
10. JK rear UCA = use as XJ LCA, its about 1-2" longer
Junior Member
Joined: Oct 2012
Posts: 36
Likes: 0
From: Kansas City
Year: 1991
Model: Cherokee
Engine: 4.0 6 cyl
Same here. Has anyone experimented with seats that provide a lower height? Even if I have to relocate and rebolt the frame to the floor.
I thought about trying seats from an s10, or Dakota. but I haven't started measuring yet.
has anyone done this yet?
Last edited by Vendi; Nov 20, 2012 at 10:14 AM. Reason: clarification
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
So these dont work, because of the angle they come out at, spent 2 hours yesterday trying to figure how to put these in. Finally got then close enough to bolt them in, but they would get stuck on the shock mount above the control arm.
10. JK rear UCA = use as XJ LCA, its about 1-2" longer
10. JK rear UCA = use as XJ LCA, its about 1-2" longer
LCA's for a 4-5" lift is only about 3/4" longer than stock if i remember correctly.
Last edited by xj_maniac_newb; Nov 20, 2012 at 09:40 AM.
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
Seasoned Member
Joined: Jun 2011
Posts: 419
Likes: 0
From: Wichita
Year: 1987
Model: Cherokee
Engine: 4.0
Originally Posted by morgan320i
any alternator upgrades for a renix 89 4.0 i see 90
+ on the list
+ on the list
Member
Joined: Mar 2012
Posts: 202
Likes: 0
From: Reno
Year: 1990
Model: Cherokee
Engine: 4.0 I6
Seasoned Member
Joined: Oct 2012
Posts: 444
Likes: 0
From: CA
Year: 1990
Model: Cherokee
Engine: 4.0L Inline 6
ANyone have any sugestions for what piston rings i should get for my 90 xj . inline 6. I need somethin cheap. cuz for the most part i just need it to get me around. plus i dont want to buy the wrong ones only to pull apart the block to find i got the wrong bore size...
Ihate measurin bores... such a pain in the **** sometimes...
Ihate measurin bores... such a pain in the **** sometimes...