Budget Builds: What Junkyard Parts Will Fit Cherokee?
Senior Member
Joined: Mar 2011
Posts: 711
Likes: 0
From: provo, utah
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by dukie564
buy a hack and tap kit - it'll have the short spline flange and seals you need to do it proper. You'll spend almost as much trying to piece together a home brew solution.
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
there a bunch of companies that make them. RE, IRO, PORC, Rugged Ridge...all basically the same just find whichever is cheapest.
Since you have a 1995, you'll also need a flange seal kit.
Since you have a 1995, you'll also need a flange seal kit.
Senior Member
Joined: Mar 2011
Posts: 711
Likes: 0
From: provo, utah
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by dukie564
there a bunch of companies that make them. RE, IRO, PORC, Rugged Ridge...all basically the same just find whichever is cheapest.
Since you have a 1995, you'll also need a flange seal kit.
Since you have a 1995, you'll also need a flange seal kit.
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by Celticclove
Ok so I just looked at the hack n tap kits cheapest I could is 150 wo taxes ...now ebay has a slip yoke eliminator kit for 165 ... what would the easier one to do?... + witch,one is better ?
☠ CF Sheriff ☠
Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
...which is somehow cheaper than the HnT kit...
Member
Joined: Mar 2012
Posts: 202
Likes: 0
From: Reno
Year: 1990
Model: Cherokee
Engine: 4.0 I6
Just got my bastard pack in no more than 15 min ago, lifted it exactly 5 inches! this was by using all of the s10 leafs minus the helper/overload and bolting them under my xj main leaf. no shackles but im sure i will put them on next, my drive shaft (slip yoke?) pulled out just under 1 inch. i got a YJ brake hose for the rear that is about 3 inches longer than stock xj (napa $17) buy new dont risk using filthy junk yard brake hoses on something as important as brakes, and possibly getting dirt in them also. i will probably buy some rubicon express rear shocks.
The rear hose for YJ year 1995 ?
Seasoned Member
Joined: Aug 2010
Posts: 326
Likes: 0
From: southern nj
Year: 1999
Model: Cherokee
Engine: 4.0
Ok, I'm looking to do a cheap 2" lift I've decided on coil spacers and i'm thinking about doing a bastard pack in the back with gm shackles. My rear is sagging probably about an inch (haven't measured). Whats my best and cheapest course of action?
CF Veteran
Joined: Mar 2012
Posts: 1,785
Likes: 0
From: Holland MI
Year: 2000
Model: Cherokee
Engine: 4.0
Read people.
All the info is on the first page.
For just 2" try just a main from another xj, junkyard or the for sale section, craigslist.
You have to shop if you want to find cheap.
All the info is on the first page.
For just 2" try just a main from another xj, junkyard or the for sale section, craigslist.
You have to shop if you want to find cheap.
Seasoned Member
Joined: Oct 2012
Posts: 444
Likes: 0
From: CA
Year: 1990
Model: Cherokee
Engine: 4.0L Inline 6
No i didnt/. but its all good. I bought the shackles. i just didnt want to drive around with my jeep all tilted forward like some hotrod or some cartoonlike dragster Dodge Charger. plus i wouldh ave had to lean forward to see out the front windshelid. but once i figure out how to get the front up those 2 inches it would be cool. assuming the rear doesnt sag down anytime soon. lmao.
Member
Joined: Dec 2011
Posts: 105
Likes: 0
Originally Posted by jeeperscreepers92
No i didnt/. but its all good. I bought the shackles. i just didnt want to drive around with my jeep all tilted forward like some hotrod or some cartoonlike dragster Dodge Charger. plus i wouldh ave had to lean forward to see out the front windshelid. but once i figure out how to get the front up those 2 inches it would be cool. assuming the rear doesnt sag down anytime soon. lmao.
