orrrrr.....

LINK:
https://www.cherokeeforum.com/f67/du...houghts-84046/

 

How can I tell if its the plow version or not?

 

R2106501AA is the part number i think for the OEM durango steering box swap. . Verification anyone? please?

 

Sorry im asking so much questions but I want to make sure I pull the Wright one, does it have the part # stamped on it?

 

im not quite sure. Its just not something I realy had at the top of my Picknpull shopping list so to speak. And everytime i found a Rango at the JY it already had its box pulled.

 

follow Dukie564s link at the top. Just pull the part and do the measurements. if it fits then ok. if it doesint. put the JY part back by the vehicle and find another rango. or you can just go into to Napa and order one. lol it might cost you alot more tho. but hey atleast it saves you time at the jy. but while your there you might see plenty of other stuff that would fit your XJ. its like sending a girl to the mall. You send a jeep guy to the JY, pshhh he might never come out lol

 

What did you do with the top? I just did the v6 coils from a 97 tbird and ended up with 5.5" of lift but I left the isolator from the stock coil in and used the isolator from the tbird coil.

 

Anyone know what amount of lift bronco II/explorer 8.8 leaf springs will net?
seller says that they are 2.5 inches wide but not sure what lift effect will result.
Thanks

 

Ive read that the leaf packs from an s-10 gives 3"-3.5" of lift, in my opinion the zr2 s-10's are lifted from factory how much lift will that be? And what will I need for the front?

 

My 92 xj laredo is currently in for body work. I need to find some replacement doors at my local yard. Can someone tell me what year doors will bolt up to my jeep? I really tried to scan the pages on fitment, Im sure this has been asked a few times... Thanks, Lee

 

Front doors from four-door XJs or Comanche doors. '84-96. '97-01 doors will bolt up and offer a one-piece window, but you have to replace the door striker where it latches. That would require welding and filling.

 

Maybe 4-4.5"? I'm unfamiliar with those, but building a bastard pack isn't an exact science.

 

So 84-96 will bolt up with no problems? Thanks alot

 

It's also worth noting if you have manual doors, you can bolt on power doors, and you should have all the wiring. It is almost guaranteed to work if the doors are from the same year as yours, but I can't guarantee the connectors will be the same on other years.

 

Im working on putting zj disks on my 8.25 ..and would like to open the hole on the backing plate prior to taking my drums and such apart..anyone know if the axle tube is the same diameter before and after the flange ..my intent is to use the measurement off the tube on the diff side to open the hole