Blend door recalibration
Thread Starter
Junior Member
Joined: Nov 2011
Posts: 95
Likes: 1
From: Birmingham, Al
Year: 2001
Model: Cherokee
Engine: 4.0
I have some heat coming out of the dash vents with the temp selector set to cold. It is 20 degrees warmer than the ambient temp. I have really good heat when the temp is set to high on all vent positions. My AC is very marginal and I was told there is a leak in the condenser. I have all the parts to replace the AC system and will be doing this before summer gets here. But that heat that is getting by can't be helping the cooling problem. It looks like the blend door my not be closing all the way on cool and some air is getting by allowing heat to come back in. I would like to know if anyone else has this problem. I know it is the opposite of the no heat problem but should help with the cooling problem.
All the cooling system components have been replaced (ALL). The Jeep runs great and runs at normal temperature. I'm at 98,000 miles
All the cooling system components have been replaced (ALL). The Jeep runs great and runs at normal temperature. I'm at 98,000 miles
CF Veteran
Joined: Nov 2009
Posts: 8,172
Likes: 17
From: The Republic of TEXAS
Year: 1998
Model: Cherokee
Engine: 4.0L HO
I believe '01 XJs have a motor actuated blend door vs older XJs r cable actuated and easily adjusted. Don't know if the motor actuated can be adjusted. CCKen will be along.....he knows that stuff like the back of his hand.
CF Veteran
Joined: Aug 2010
Posts: 8,357
Likes: 103
From: Canton, MI
Year: 1999
Model: Cherokee
Engine: 4.0
I have some heat coming out of the dash vents with the temp selector set to cold. It is 20 degrees warmer than the ambient temp. I have really good heat when the temp is set to high on all vent positions. My AC is very marginal and I was told there is a leak in the condenser. I have all the parts to replace the AC system and will be doing this before summer gets here. But that heat that is getting by can't be helping the cooling problem. It looks like the blend door my not be closing all the way on cool and some air is getting by allowing heat to come back in. I would like to know if anyone else has this problem. I know it is the opposite of the no heat problem but should help with the cooling problem.
All the cooling system components have been replaced (ALL). The Jeep runs great and runs at normal temperature. I'm at 98,000 miles
All the cooling system components have been replaced (ALL). The Jeep runs great and runs at normal temperature. I'm at 98,000 miles
The blend-air door actuator is not adjustable. However, there is a possibility the the door is sticking and not closing off the heater core airflow. But I think you should check the Refrigerant charge to see if it's too low or empty before looking into the blend-air door sticking.
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
May 21, 2019 02:38 PM
Eli Brda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 27, 2015 04:13 PM
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 24, 2015 07:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



