Bad Vibration at start up and shut off
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Marshall, WI
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0L i6
Bad Vibration at start up and shut off
last night i replaced the TCase as i was having vibration issues in 5th gear. now when i start up or turn the jeep off i have a really bad vibration coming from somewhere underneath. doesnt matter if the tranny is in gear or not, just seems to have a really horrible vibration sound when i start it up or turn it off. even when i just sit at an idle i can hear some kind of noise that seems to be coming from the transmission but im not sure....any thoughts on what i should be looking for? motor mounts and tranny mount are all good..
94 cherokee 4x4, 5spd man, 4.0
edit: ok its has to be something with the transmission/torque converter? as this is my first rig with a manual tranny i have no idea if they have torque converters on them but by the way its acting i assume its something along those lines. so my first thought is that the bolts have come lose and need to be tightened but seeing as the bell-housing is completely closed, i have to separate the motor and tranny.
so how far do i need to pull the two apart to get what ever bolts may be the cause of the unbalanced thing in there? im fairly skilled and can do the job i just need to know what im going to be getting into as this is my DD
edit: just read this and i think im f*kd =( http://borntourist.com/gallery2/v/mods/clutch/
94 cherokee 4x4, 5spd man, 4.0
edit: ok its has to be something with the transmission/torque converter? as this is my first rig with a manual tranny i have no idea if they have torque converters on them but by the way its acting i assume its something along those lines. so my first thought is that the bolts have come lose and need to be tightened but seeing as the bell-housing is completely closed, i have to separate the motor and tranny.
so how far do i need to pull the two apart to get what ever bolts may be the cause of the unbalanced thing in there? im fairly skilled and can do the job i just need to know what im going to be getting into as this is my DD
edit: just read this and i think im f*kd =( http://borntourist.com/gallery2/v/mods/clutch/
Last edited by kissthis66; 09-18-2011 at 03:03 PM.
#2
Seasoned Member
Join Date: Mar 2010
Location: Modesto
Posts: 379
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0 high output straight 6
There is no torque converter on a manual transmission. They use a flywheel,clutchdisc,pressure plate assymbly.
Are you sure the tcase has the same splinecount as the old one?
Are you sure the tcase has the same splinecount as the old one?
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-04-2015 10:14 PM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-27-2015 02:09 AM
jeeper albert
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-24-2015 01:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)