Flushing the coolant and noticed this. Is this bad? I couldnt get it to tighten up but it will go back and forth

 

Try removing the nut, the bolt is most likely pressed it, cleaning the threads and using an impact to run it home

 

most likely the threads stop there to allow movement of the link

 

the bushings is shot,you need to replace it

 

Take them off if you aren't way high in the sky...... It's more fun and capable.

 

replace both of them. really cheap parts. and its simple as hell to do. dont want to induce death wobble by having bad/no sway bar links!

 

 

What's a sway bar lol

 

So i should replace bushings on both sides? I thought it was odd becaause one side with move back and forth and one doesnt. The bolt doesnt seem to tighten up on the side that moves. So will new bushings fix this or is there something more

 

dont even no where you would get them prob a dealer item or jy only

 

That little gap means nothing, you can see that there is rust in that gap proving that the bushing is not moving back and forth.

 

no, it easily moves back and forth

 

x2 the bolt is fine your bushing is shot replace boths sides when youe get the chcance probably like a 20 dollar part