BoostedEcos

Hey everyone, I have a 2000 xj with stock fog light option. I removed the foglights when I bought it and they didn't work anyways. I used the stock wires to run some cheap walmart lights. When I first tested them they worked. Now they don't. With the lights unplugged the wires have voltage but don't work plugged in. Its not the lights either cause I tried some other lights and still didn't work. Oh and the light on the insideon the switch works when flipped on if that matters. I couldn't find a fuse for them even though they have power and in the fuse panel under the hood the spot for the fog relays there is nothing there. There isn't even terminals on the inside to push a relay into. Just seeing if someone has any ideas before I just rewire it all. Thanks. Oh and could it be the switch even though it all seems to work? Oh and the bulbs are 55w h3 bulbs. Not sure what the factory ones are. Thanks again

odgreen

are the grounds good?

gmv93

yes, did you connect h3 bulb grounds to chassis of your fog lights?

BoostedEcos

Thanks alot guys it was def. a ground. It was the ground for the relay. Thanks again and have a happy holiday.

ken72

Hey Boostedecos, I am looking at doing the same thing. I removed my stock fogs when I cut the skirt off my bumper. I was looking at some 55w walmart replacements and wanted to install them to my stock wires. Did you use the harness from the stock lights? I was thinking of cutting the stock harness from the original lights and splicing it to the new lights. Is this what you did? Do you have any photos of you set up.

BoostedEcos

Um yeah I just cut the connectors off the stock fog lights and connected the pig tails to the new lights then just plug them in. Sorry no pics at the moment.

Cabby

Sorry guys, think I'm being thick here! I have a 98 Cherokee with the stock fogs, like you the switch lights up but nothing at the front. The bulbs look ok, the wires look connected, can't find the fuse. Where should I check for the grounding?

Jeepability

mine wouldnt work and i checked in the fuse panel and theres no fuse or relay for the fog lights. guess ill go to the dealer to get one

Cabby

Just a note, check your switch first! My fog lights work but only if you put the switch in the on position and then push it in, up or wiggle it about!

LT6916

Bringing this back too.

I bought a replacement factory switch for my fogs about 2 months ago. I installed it and the fogs worked again.......for about 2 weeks, then nothing. I know the switch didn't already fail. Performing some swaptronic troubleshooting I swapped the Fog relay and the A/C clutch relay...no different. Bulbs can't be blown, I get 32ohms on the light harness.

I miss having fog lights. Any ideas?

99xjclassic

i have prob need help! my passenger side foglight dems when i have blinkers on and if i have flashers on??!!!?