Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Another DW thread!

Thread Tools
 
Search this Thread
 
Old Apr 21, 2012 | 10:31 PM
  #1  
Juan4you's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2011
Posts: 851
Likes: 0
From: Riverside county
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Default Another DW thread!

Was going thru some threads, unfortunately couldn't find what I was looking for. 96 with a RC 4.5 X series lift, steering stabilizer, adj track bar. I build up my front diff, so when it went back on I also installed new drop pitman, drag link and tie rod joints, hub assembly, gear box(spacer is good). Running 35x12.5x15. Had it aligned and drive 80 miles to offroad location, offroaded for the day and drive home 80 miles. This was last week and suddenly I got a DW today doing about 50... Horrible Dw! What am I missing or look for? Prethanks!
Reply
Old Apr 22, 2012 | 08:54 PM
  #2  
Juan4you's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2011
Posts: 851
Likes: 0
From: Riverside county
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Default

I'm assuming ya'll stumped as I am??
Reply
Old Apr 23, 2012 | 01:57 AM
  #3  
ZINGGG's Avatar
CF Veteran
 
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

Rebalance your tires and check your ball joints for play. Go through and check control arm bushings and check every single bolt.

Have a friend hop in, start your XJ and move the steering wheel all the way left to right to left to right to left and so on while you sit in front and look for looseness in all components. Something is loose or worn down there. If not, you may have to get it re-aligned.

Read this:
https://www.cherokeeforum.com/f51/di...-wobble-55021/
Reply
Old Apr 23, 2012 | 09:18 AM
  #4  
Juan4you's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2011
Posts: 851
Likes: 0
From: Riverside county
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Default

That was the link I was looking for! Lots of info in detail. Thank you very much.
Reply
Old Jun 2, 2012 | 12:47 AM
  #5  
Juan4you's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2011
Posts: 851
Likes: 0
From: Riverside county
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Default

So I finally got down to retriple check muy front end components, though it's all new. My track bar had a bit of play. I had a feeling I didn't tighten enough, since I was worried of over tightening. After I properly tighten it, should I go back for and alignment again? Thanks again everyone for your help...especially the non sarcastic help! ;-)
Reply
Old Jun 2, 2012 | 03:24 AM
  #6  
F1Addict's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 2,381
Likes: 6
From: SoCal
Year: 1989
Model: Cherokee
Engine: 4.0
Default

If you just tightened your track bar and didn't make any adjustments then I would say drive it a bit first before paying for another alignment. A loose track bar can definitely cause DW and you may have cured it with a wrench.

Death Wobble was terrifying in my stock '89 with stock wheels and tires, I can't imagine what it's like when 35s get going. Hope you fixed it with the track bar tightening.
Reply
Old Jun 3, 2012 | 11:45 PM
  #7  
Juan4you's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2011
Posts: 851
Likes: 0
From: Riverside county
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Default

Death wobble gone! Can't believe I didn't tighten every thing down. It literally took like 2 turns. Thanks for all the help!
Reply
Old Jun 3, 2012 | 11:53 PM
  #8  
purplegrocerygogetter's Avatar
I WIN!
Premium Member
 
Joined: Sep 2011
Posts: 10,898
Likes: 0
From: Sunny CALIFORNIA :-p
Year: 1997
Model: Grand Cherokee
Engine: BIG! HUGE!
Default

Yay! Good job Juan!
Reply
Old Jun 4, 2012 | 12:28 AM
  #9  
rklettke's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 542
Likes: 2
From: Phoenix, AZ
Year: 1998
Model: Cherokee
Engine: 4.0 L6
Default

my ex girlfriends gift of a torque wrench recently got to me after a 3 months delay lol, I went back and double checked everything with it even though i just have a small bumpsteer
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BossHoss25
Modified XJ Cherokee Tech
21
Dec 9, 2020 12:15 PM
skarpyona
Jeep Builds
37
Dec 13, 2018 12:39 AM
Paco182
Fabrication & builders section.
12
Oct 12, 2015 05:49 PM
XJoffroad1
Modified XJ Cherokee Tech
16
Oct 4, 2015 06:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:00 AM.