99 cherokee sport 4.0 Plastic tube on exhaust side?
#1
Member
Thread Starter
Join Date: Aug 2013
Location: Davie, FL
Posts: 217
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
99 cherokee sport 4.0 Plastic tube on exhaust side?
Hello All,
I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..
Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?
Thanks ,
Ant...
I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..
Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?
Thanks ,
Ant...
#2
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 82 Likes
on
67 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hello All,
I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..
Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?
Thanks ,
Ant...
I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..
Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?
Thanks ,
Ant...
If it's the larger tube it's for the Leak Detection Pump. If you don't have an LDP, it can be shortened but retain the cap on it. If its a smaller diameter tube you must retain it inrtact. It's for the EVAP system.
Can you take a pic of it?
#3
Member
Thread Starter
Join Date: Aug 2013
Location: Davie, FL
Posts: 217
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Is this tube about 5/8" in diameter, or is it a smaller diameter tube?
If it's the larger tube it's for the Leak Detection Pump. If you don't have an LDP, it can be shortened but retain the cap on it. If its a smaller diameter tube you must retain it inrtact. It's for the EVAP system.
Can you take a pic of it?
If it's the larger tube it's for the Leak Detection Pump. If you don't have an LDP, it can be shortened but retain the cap on it. If its a smaller diameter tube you must retain it inrtact. It's for the EVAP system.
Can you take a pic of it?
It's the bigger one,
Thanks,
Ant...
Thread
Thread Starter
Forum
Replies
Last Post
mjcxking
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
08-23-2015 07:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)