Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   99 cherokee sport 4.0 Plastic tube on exhaust side? (https://www.cherokeeforum.com/f2/99-cherokee-sport-4-0-plastic-tube-exhaust-side-190368/)

Ant. 03-16-2014 04:57 PM

99 cherokee sport 4.0 Plastic tube on exhaust side?
 
Hello All,

I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..

Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?

Thanks ,

Ant...:cheers:

CCKen 03-16-2014 07:09 PM


Originally Posted by Ant. (Post 2806008)
Hello All,

I have a 99 cherokee sport 4.0L 4x4..
Well I was under the jeep yesterday fixing the transfer case linkage and I looked up and saw the plastic tube that runs up bye the exhaust, manifold ( Not sure what it is for).. It was up against my exhaust manifold and it melted..

Went to the JY today and could not find one... What is the plastic pipe/tube for?
I am thinking it's a vent or something for the fuel tank.. Can I just cut it right below the burnt part and cap down underneith?

Thanks ,

Ant...:cheers:

Is this tube about 5/8" in diameter, or is it a smaller diameter tube?

If it's the larger tube it's for the Leak Detection Pump. If you don't have an LDP, it can be shortened but retain the cap on it. If its a smaller diameter tube you must retain it inrtact. It's for the EVAP system.

Can you take a pic of it?

Ant. 03-16-2014 08:37 PM


Originally Posted by CCKen (Post 2806124)
Is this tube about 5/8" in diameter, or is it a smaller diameter tube?

If it's the larger tube it's for the Leak Detection Pump. If you don't have an LDP, it can be shortened but retain the cap on it. If its a smaller diameter tube you must retain it inrtact. It's for the EVAP system.

Can you take a pic of it?

Ya, Ill post pic tomorrow after work..

It's the bigger one,

Thanks,

Ant...:cheers:

Ant. 03-17-2014 07:51 PM

4 Attachment(s)
Heres a pic of the tube..
I did a temp fix till I found another tube..


Attachment 326874



Attachment 326875


Attachment 326876



Attachment 326877

JWheeler 03-17-2014 08:00 PM

Looks like the vent line for the LDP. Just replace it and put the little cap back on the end. It needs to be vented to the air.


All times are GMT -5. The time now is 11:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands