Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

97 Cherokee 4.0 engine miss and using water

Thread Tools
 
Search this Thread
 
Old 09-16-2013, 09:49 PM
  #1  
Newbie
Thread Starter
 
kevingraham11's Avatar
 
Join Date: Sep 2013
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default 97 Cherokee 4.0 engine miss and using water

Just purchased a 97 Cherokee sport 4.0 and it has some engine trouble. It was pretty cheap so I took a chance. I'm thinking that I will have to look into the head but any suggestions will be greatly appreciated. 200,000 miles and very sound interior and body. Engine has a bad miss especially at a low rpm. The engine has a brand new distributer cap plugs and wires. It is using water and can clearly be seen through the exhaust. Radiator is pretty dirty inside and the reservoir makes a loud gurgling sound when it is shut off. The electric fan doesnt come on when i turn on the ac either. I think the jeep may have been overheated though when running the engine sounds great without any ticks or pecks. Other than the miss lol. Also the tach and speedometer take spells where they fall to zero and then work. Guess I've got some work on my hands. Just dreading tearing into the engine!
Old 09-16-2013, 09:56 PM
  #2  
Seasoned Member
 
rawk krawler's Avatar
 
Join Date: Nov 2012
Location: Auburn, CA
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Year: 95
Model: Cherokee
Engine: I6 4.0 242 HO
Default

Pulled the plugs? I'd be all over head gasket... Before driving it any more
Old 09-16-2013, 10:08 PM
  #3  
Newbie
Thread Starter
 
kevingraham11's Avatar
 
Join Date: Sep 2013
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Yea. It has new plugs as well. Guess the guy tried a tune up and failed. I'm hoping you're right. I don't think it's a valve either. Won't pull a dollar bill in at the exhaust when it misses. Which may be a good thing.
Old 09-16-2013, 10:10 PM
  #4  
Seasoned Member
 
rawk krawler's Avatar
 
Join Date: Nov 2012
Location: Auburn, CA
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Year: 95
Model: Cherokee
Engine: I6 4.0 242 HO
Default

I was suggesting a plug as to pull the plug from the missing cylinder, and the respective injector plug, and see if it kicks water out
Old 09-16-2013, 10:23 PM
  #5  
Newbie
Thread Starter
 
kevingraham11's Avatar
 
Join Date: Sep 2013
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Good idea. I will to a temp check on each cylinder and pull whichever plug needed. Will repost. Thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-26-2019 06:30 PM
jeeper albert
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-24-2015 01:17 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-22-2015 01:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 97 Cherokee 4.0 engine miss and using water



All times are GMT -5. The time now is 04:28 AM.