94 axle in an 88
05-18-2010, 03:42 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: swansea ma
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
94 axle in an 88
i have a 88 cherokee with the dana 30 front and a dana 35 in the rear i got a donor 94 cherokee and that one has a dana 30 in the front and a chrysler 8.25 in the rear idk how i can hook up the front axle cause in the 88 the front axle to engage the front axle for 4wd on the 94 axle it dosent have that to engage it so what do i need to do to engage that front axle
05-18-2010, 05:06 PM
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Move the lever from 2H to 4H, or 4L. Just cap off the vacuum lines that go to the axle, install the 94 axle and be done with it.
05-18-2010, 05:11 PM
#3
Senior Member
Join Date: Aug 2009
Location: Pueblo, CO.
Posts: 903
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
you may need to upgrade the master cyl. as well, I did this swap on my MJ. I put a 95 XJ axle on a 87 MJ mainly to get rid of the vacuum disconnect. I ended up having braking probs after. unfortunately I was moving and ended up selling the truck before I was done with it so I'm not sure of the out come.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
