mine is stick.

 

I guess I never saw that mentioned. Does the clutch slip?

 

Nope. not at all. which is surprizing because it is everywhere. the only thing it could really be is the front tranny seal. considering the past threads. there isnt a chance its external is there??

 

WATCH THIS VIDEO... This is probably the cause of it all. this was 2 days before it started leaking. oops.. ha

<object width="400" height="240" ><param name="allowfullscreen" value="true" /><param name="movie" value="http://www.facebook.com/v/1852045185313" /><embed src="http://www.facebook.com/v/1852045185313" type="application/x-shockwave-flash" allowfullscreen="true" width="400" height="240"></embed></object>

 

Here is another thing... my Oil Pressure Gauge bounces back and forth from 40 at idle to 80 interstate.. thats why i figured it was oil.. i still belive its oil.. only because im stubborn and have it set in my head that it is.

 

80!!!!! What weight oil??? Should be shootin a lot through the bypass by then.

 

5w 30. It used to ride 80 all day so I figured the gauge was fudged... but then it started leaking and now it wants to "work"

 

But then again.. I KNOW its not oil. My level hasn't dropped for 3 days of leaking like I said.. if you watched the movie a couple posts back it'll show that mud has a chance to submerged the tranny... clogging the breather hose.. I just went and blew a bunch of junk out of it hopefully that's the reason its gear oil possibly blowing out of the front seal because it can't breath and hense the reason it only leaks when I go above 40. If that doesn't help I'm thinking its the front seal on the tranny. It can be nothing else. As for the oil pressure.... I don't know. Maybe a bad gauge? Not sure. But that's the least if my worries if I can get this leak to stop, ill be alright till next week when something else goes wrong.. gotta love a jeep

 

Blowing out the line helped a little. but i think its the fact that my gear oil is gone.. im a winner. its tranny. hopefully its just the front seal... ill post the verdict when she's done.. thanks for all your guys help

 

Good time to replace the clutch disc, pressure plate, and throw out bearing.

Sure as you don't one will fail next week.

 

its not moveing thgat much and worse under load if you look at the bearings you'll see thyey are egg shapedthe lower saddle worn more than the upper

 

its my front tranny seal. it doesnt leak a drop of oil. ill need to drop it and replace the seal. im going to look at a new jeep today. 2000 140k 4.5" 31's. i think im gunna buy it and crawl this one.