is this the same for a 87 Pioneer

 

I had just hooked up my vac lines tomorrow afternoon when the sun is up I will take pictures.

 

Sorry i havent taken pictures the weather has been bad up here in alaska

 

I ran into this problem when my dad remove my engine. I don't know if it from my 4x4 or just a regular vacuum o where it belongs

 

Here's how you fix the vacuum issues with the CAD once and for all.

https://www.cherokeeforum.com/f51/fr...ss-91-a-38629/

 

do this ^^^

but this may help vvv

 

On my '84, I just slid the collar over and used a stainless steel hoseclamp to keep it in place.

Figure that in 90/91? They removed the axle disconnect anyways.

I still see my busted fork in the garage once in a while.

 

AT LAST !!!! The diagram I've been looking for since I bought the beast!

Thank you, thank you, THANK YOU!!!

Now, if someone can tell me where the red line hooks up to the manifold vacuum. Mine is just laying there next to the distributor, and I have no idea where I should connect it.

Can anybody give me a hand?

 

Ha! I found it! It goes to a "Y" on the big line off the intake manifold that goes to the vacuum ball!

 

That's why there's a plug on my Y.

 

Hey Hank, (and everybody). I put that disco diagram with the others in my signature. Much thanks!

 

I stole it, too!!

 

no prob. i found it a few years ago when i bought the xj. the cad was not engaging and i knew nothing about jeeps. i was googling the **** out of everything i could think of and found that.

 

I just realized that my red hose is connected to the vacuum line, it's the transmission I need to hook it to!!

 

I believe the switch is on the transfer case.
Command Track went to 95?