I searched and did not find anything. I am getting 3.5" sptings and 1" spacers from a guy cheap and will be putting a tera flex 1.5 shackle in the rear. I have 3.5" in the rear now. My question is other than brake lines and CA's what is needed or can I get by with what I have for a little while? Thanks for the help.

 

Your probably going to encounter some vibes with that much lift, if you do I would recommend getting a SYE and a CV Driveshaft. You also are going to need an ADJ tracbar to re center your axle.

 

^^^Kyle-
After you do a trac bar relocation, can you then go to an adjustable trac bar?

Sorry for the jack...

 

You would then return to your original tracbar mount hole when using an adj tracbar.

 

^^Ok, didn't know if the extra hole would weaken anthing...

 

So adj. track bar and I have a TC drop and also have some 6* sims sittin in the garage will that work til I have the funds for SYE and CV axle.

 

Ya if you have a TC drop it will work temporarily, but the adj tracbar would be the main thing to get right now.

 

i have LCA's for a 4.5" for sale look in the for sale section.

get the advance adaptors SYE and a front driveshaft out of an automatic for the back

 

I saw the LCA's and posted. Where are you and how much for shipping? My zip is 25414.

Anybody have an extra Adj. tracbar layin around?