318 motor swap (PLEASE HELP)
#1
Newbie
Thread Starter
Join Date: May 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985
Model: Cherokee
Engine: 2.8 V6
318 motor swap (PLEASE HELP)
I need to know if i can put a 318 from a 1983 New Yorker into a 1985 Cherokee? And how hard is it? I want to retain my 4x4 so i was thinking of getting a tranny from a Ram Charger... Will any of this work? Any advise is appreciated. Thanx
#2
Seasoned Member
Join Date: Feb 2009
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
just get the whole package from the ram charger.
318, TF 727, NP208 wouldnt be a bad drivetrain, with some new drive shafts. As far as electrical... try painless wiring for a solution.
318, TF 727, NP208 wouldnt be a bad drivetrain, with some new drive shafts. As far as electrical... try painless wiring for a solution.
#3
Senior Member
Join Date: Jan 2009
Posts: 920
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
your looking at a lot of work and a tight fit i know a few people have put the small block chevys in the cherokees but i havent seen to many others might want to look into a stroker kit probably cheaper and definitely easier with pretty good power gains
Thread
Thread Starter
Forum
Replies
Last Post
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-16-2015 08:15 AM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)