2in with 30x9.50s or 3in with 31x10.50s?
Thanks for all the feedback guys. Ha I realize 3" is nothing to most of you just bigger relative to the 2" lift. But I'll be going with the 3" and 10.50's i think. Now the big question is A/T or mud tires??
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
I agree with you there,but his original post was in regard to lift and tire size and what kind of stance he was looking for not cost
Junior Member
Joined: Sep 2010
Posts: 70
Likes: 0
From: Denver, CO
Year: 1993
Model: Cherokee
Engine: 4.0
Ya cost isn't a huge deal to me. It wont be a high end 3" but something around 400 bucks. If the BB didn't look bad I never mind saving 300 dollars, I also think the "real" lift will perform much better. Anything you need with a 3"? t-case drop or anything extra that doesnt come in the kits?
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
Ya cost isn't a huge deal to me. It wont be a high end 3" but something around 400 bucks. If the BB didn't look bad I never mind saving 300 dollars, I also think the "real" lift will perform much better. Anything you need with a 3"? t-case drop or anything extra that doesnt come in the kits?
Seasoned Member
Joined: Jun 2011
Posts: 386
Likes: 0
From: in a small town named ...
Year: 1997
Model: Cherokee
Engine: 4.0L
What does backspacing do is it good or bad. Plus look at Rockyroad outfitters they have good cheap lift kits. Well. Leveling kits but ya their similar.
Your backspacing, in short, is how far out your rims stick out. I did end up going with the 3" guys. Except my 3" coils from Rusty's only gave me 2" now 31's are too tight:/ Need spacers.. I wish I would have went with the 2" and saved some cash!
Senior Member
Joined: Dec 2010
Posts: 882
Likes: 2
From: Michigan (Home state) Stationed in Montana
Year: 1993
Model: Grand Cherokee
Engine: 5.2L MPI V8 (318)
That's unfortunate, sorry to hear. I didn't buy any kit for my cherokee, just pieced together parts for my Cherok. New full leaf packs in rear from ProComp (Stock height+2.5), then for front I did 2" spacers. Ended up with 3.2 in the rear after settling since april, and about 2.75 in front. (UP country 1" bonus, sagged down a bit) plus the 2" spacer. My overall total for the lift was like 250. All new parts from the internet. Going to three inch coils and doing shackles very soon.
Running 30" snow tires though... new shoes are expensive. Thread
Thread Starter
Forum
Replies
Last Post
Kydude7
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Sep 20, 2015 06:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




