2001 "Cherokee" and "Sport" Emblems
03-22-2010, 06:14 PM
#1
Newbie
Thread Starter
Join Date: Aug 2009
Location: New Jersey
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Liter
2001 "Cherokee" and "Sport" Emblems
Hey guys. I am about to do some bodywork on my wife's cherokee. We are going to get it painted. I was wondering where I could buy a new set of emblems to replace the "Cherokee" and "Sport" emblems that are located on the door. I could get them from the dealer, but I know it will cost me a fortune.
Does anyone know where I could find these emblems?
Thanks very much!
Does anyone know where I could find these emblems?
Thanks very much!
03-22-2010, 06:28 PM
#3
Newbie
Thread Starter
Join Date: Aug 2009
Location: New Jersey
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Liter
this I know. I have them on my vehicle. I am worried that if I go to pull them off, and then try to put them back on, I am gonna mess them up.
03-22-2010, 06:53 PM
#5
Member
Join Date: Feb 2010
Location: Somerset, Ky
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
03-22-2010, 07:04 PM
#6
Newbie
Join Date: Aug 2009
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
10-09-2014, 03:58 PM
#7
Junior Member
Join Date: Nov 2012
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
What the heck? Not sure how I ended up responding to this long ago dead thread - oh well. I am leaving my response to help someone down the road since there was no good answer here.
You can peel them off without damaging them - just start slow and work yoru way around each letter carefully. The integrated adhesive coating on the back will be shot. This was no problem for me - I cut 3M adhesive tape to size (yes, tedious) to re-adhere all of my OEM emblems following a paint job. Worked liek a charm with the exception that (1) it was tedious, and (2) it the letters are slightly raised due to the fact the 3M tape is thick. If you go this route definitely use 3M brand adhesive tape nothing else will be as good.
I could not find a reasonable price for a set of OEM emblems and I looked pretty extensively. Not sure what the going rate at the dealer for a full set is.
You can peel them off without damaging them - just start slow and work yoru way around each letter carefully. The integrated adhesive coating on the back will be shot. This was no problem for me - I cut 3M adhesive tape to size (yes, tedious) to re-adhere all of my OEM emblems following a paint job. Worked liek a charm with the exception that (1) it was tedious, and (2) it the letters are slightly raised due to the fact the 3M tape is thick. If you go this route definitely use 3M brand adhesive tape nothing else will be as good.
I could not find a reasonable price for a set of OEM emblems and I looked pretty extensively. Not sure what the going rate at the dealer for a full set is.
Trending Topics
10-09-2014, 04:45 PM
#8
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 82 Likes
on
67 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
These folks have them:
http://stores.revolutionparts.com/mo...str=5GN26CA1AA
"Sport" Decal, part number 5GN26CA1AA.
"Cherokee" Dimensional Graphic, Silver, part number 5GC82CA1AA.
Mopar parts.
http://stores.revolutionparts.com/mo...str=5GN26CA1AA
"Sport" Decal, part number 5GN26CA1AA.
"Cherokee" Dimensional Graphic, Silver, part number 5GC82CA1AA.
Mopar parts.
Thread
Thread Starter
Forum
Replies
Last Post
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
02-15-2021 01:47 PM
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
BlvdKreeper
Cherokee Chat
5
10-01-2015 06:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)