Hey guys well i finally took some pics of my xj.






I have a questions i found 2 wires that dont connect to anything and im just wondering if you guys could tell me what they are for.




I would have posted this in the introduction section but since i have a question i decided to put it here.

The guy before me put in a viper alarm and remote starter so i thought maybe thats why those wires dont connect to anything but i want to know for sure what they are there for.

thanks.

 

1st kinda looks like tcu 2nd.. well does your oil pressure guage work?

 

I have a 96 sport. Im not sure what the male end looks specifically like but coming from right there i have 3 wires coming out and they all go down fallowing the transmission dipstick. So look around for the other end near the tansmission on the underside. Good luck.

 

thanks guys and yes the oil pressure gauge works. Im not sure if it works good but it works. When i drive oil pressure gauge shows 40-50 and when i idle at cold its 40 and when it warms up it shows about 20. Now I have a manual for a jeep grand cherokee that has the 4.0l and it shows that at idle as long as its above 13psi its fine. So im guessing its all good.

 

and the tcu you mentioned it looks like it has the end part on it to be blocked off. hmm

 

mine has a 2 wire connection around your last pic for the under hood light.

 

Ima go look. What year is this?

 

ahh okay, so its nothing to important

 

slick its a 98

 

What does tcu stand for and what is it?

 

Transmission Control Unit. It tells the transmission when to shift. Any check engine codes?

 

nope, no codes everything passes. It seems fine when it shifts. What rpms should each gear shift at?