Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1991 Cherokee. How to shift to 4wd?

Thread Tools
 
Search this Thread
 
Old Mar 10, 2010 | 02:44 PM
  #1  
Nicnic100's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2010
Posts: 38
Likes: 0
From: Louisiana
Year: 1991
Model: Cherokee
Engine: 4.0L 6 cyl HO
Default 1991 Cherokee. How to shift to 4wd?

I've been playing with my cherokee trying to get it into 4wd mode. I have done it stopped and moving at slow speeds but it's like putting it in neutral. I heard you have to be moving at least 30mph for it to engage. Is that right? It sounds like that would tear something up to me.
Reply
Old Mar 10, 2010 | 02:48 PM
  #2  
89Laredo's Avatar
CF Veteran
15 Year Member
 
Joined: May 2009
Posts: 10,423
Likes: 61
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

You can "shift on the fly" at up to 45mph
just let off the gas and pull the shifter back to 4hi. DO NOT try going to 4lo while moving.

Another way is to stop, put it in neutral, and pull the shifter back to 4hi or 4lo.

Originally Posted by Nicnic100
I have done it stopped and moving at slow speeds but it's like putting it in neutral. I heard you have to be moving at least 30mph for it to engage. Is that right?
Maybe your shifter is out of adjustment.
You do not have to be moving at 30mph, whoever told you that should be KITN (kicked in the nuts . Just made it up lol)
Also, be sure to not use it on pavement unless you have the full time (NP242) Tcase

Last edited by 89Laredo; Mar 10, 2010 at 03:12 PM.
Reply
Old Mar 10, 2010 | 03:19 PM
  #3  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

I just put mine in Neutral and then shift mine into 4PT or 4FT or even 4L. but I havent done it moving. I guess in fear of breaking something. lol I know its called shift on the fly but man it just seems like something will break. lol
Reply
Old Mar 10, 2010 | 03:22 PM
  #4  
89Laredo's Avatar
CF Veteran
15 Year Member
 
Joined: May 2009
Posts: 10,423
Likes: 61
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

I do it all the time...
Nothing to worry about really. I was worried at first too.
You just let off teh gas, pull the lever up into 4hi. When youre done, let off the gas and push it back to 2hi
Reply
Old Mar 10, 2010 | 03:35 PM
  #5  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

But that can only be done for 4pt and 4ft Not 4l correct because your going to fast for 4l.
Reply
Old Mar 10, 2010 | 03:38 PM
  #6  
89Laredo's Avatar
CF Veteran
15 Year Member
 
Joined: May 2009
Posts: 10,423
Likes: 61
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default

Yup, FT and PT but no 4L
NOTE: If shift lever is moved from one position to another
while the vehicle is not moving, it may be necessary to move
the vehicle forward or backwards slightly for the transfer case
to fully engage 4WD, especially in cold weather.
NOTE: it may be necessary when shifting on the fly between 2WD,
4 PARTTIME or 4 FULLTIME to briefly lift off the throttle once or
twice, especially in cold weather.

CAUTION: Never attempt to engage 4WD LO when vehicle is moving faster
than 2-3 mph (3-5 kmh). Transfer case damage may result.
*WARNING* you can't switch to 4WD LO "on the fly" like you can with
4WD HI.The vehicle must be moving slowly (2-3 mph) and the
*TRANSMISSION* must be shifted to neutral.

*WARNING: NEVER PARK YOUR VEHICLE WITH RANGE LEVER IN THE
N (NEUTRAL) POSITION. THE VEHICLE COULD ROLL UNEXPECTEDLY
EVEN IF AN AUTOMATIC TRANSMISSION IS PLACED IN PARK OR A
MANUAL TRANSMISSION IS IN GEAR.*
Reply
Old Mar 10, 2010 | 03:41 PM
  #7  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Nice little write up. Thanks. Well it cleared stuff up for me hopefully it will for the OP.
Reply
Old Mar 10, 2010 | 03:43 PM
  #8  
93xjpm's Avatar
Member
 
Joined: Mar 2010
Posts: 107
Likes: 0
From: So-Cal
Year: '93
Model: Cherokee
Engine: 4.0L straight-6
Default

sometimes you have to jerk the 4wd shifter a little.
when i first got my jeep i was having the same problem. i would put it in 4hi and push the gas and it would rev up.
dont yank it so hard it breaks just give it a good tug and look on the dash, the "PART TIME/FULL TIME" light should go on
Reply
Old Mar 10, 2010 | 03:49 PM
  #9  
captainofiron's Avatar
CF Veteran
 
Joined: Apr 2009
Posts: 1,109
Likes: 3
From: Austin, Texas
Year: 1991
Engine: 4.0 I-6 H.O.
Default

Originally Posted by 93xjpm
sometimes you have to jerk the 4wd shifter a little.
when i first got my jeep i was having the same problem. i would put it in 4hi and push the gas and it would rev up.
dont yank it so hard it breaks just give it a good tug and look on the dash, the "PART TIME/FULL TIME" light should go on
+1

mine goes pretty easy usually in to 4H, but sometimes I have to get rough on the lever to push it into 4L
Reply
Old Mar 13, 2010 | 08:04 PM
  #10  
krkx93's Avatar
CF Veteran
 
Joined: Sep 2009
Posts: 1,152
Likes: 2
From: louisiana
Year: 1994
Model: Cherokee
Engine: 2.5L
Default

mines a standard. it goes right in at any speed as long as all the tires are rotating at the same speed. if the rear tires are spinning and the front arnt it wont go in. otherwise itll go into 4wd anytime you pull the handle
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
2
Sep 23, 2015 07:02 PM
xltom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 19, 2015 01:37 PM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 15, 2015 02:07 PM
lil01cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 10, 2015 05:56 PM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Sep 4, 2015 11:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:08 AM.