Jeep Cherokee Forum - View Profile: 93xjpm

93xjpm 93xjpm is offline


About Me

  • My Cherokee
    4.0L straight-6
    Transfer Case
    Rear Axle
    31x10.50x15 yokohama ATs
    Lift Specifications
    4.5" R.E. Superflex
    Misc Accessories
    sweat and blood...
  • General
  • Signature


Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 09-07-2014 02:40 PM
  • Join Date: 03-10-2010
  • Referrals: 0


Showing Friends 1 to 10 of 16

Visitor Messages

Showing Visitor Messages 1 to 10 of 11
  1. sgtskid
    08-21-2011 10:43 PM - permalink
    Sorry for the long delay in response. I have been uber busy and haven't had internet for a while. I think my injectors came from a 96 neon. I had to rob them from two different cars to make a set of six. I tested the ohms and thoroughly cleaned them before installing. I did not change the fuel pressure regulator. All I did was change the injectors and o-rings. Be sure to coat the o-rings with a little vaseline or oil before installing to minimize the risk of pinching a ring. I haven't had a single problem with them yet and I have over 10k on them. And, yes they are the 703's. I picked up 8 at Pull-a-part.
  2. 1987XJ
    07-05-2011 02:25 PM - permalink
    Yeah i did it myself, but its painted green now.
  3. Backwoods Country Girl
    05-10-2010 01:28 AM - permalink
    Hey you
  4. ceejay612
    04-10-2010 07:24 PM - permalink
    did the sye with a front DS and it works great. i changed out the universals on the DS first. FYI there are needle bearings in the middle of the double cardon joint with a spring inside the ball. try not to lose those.
  5. 96liftedXJ
    03-21-2010 01:38 PM - permalink
    That pic is with the 31's. I just added some new pics today with the 33's on soft 8's so check them out. The black above the fender is just painted. And i went out and bought some clips and pushed into the holes. It looks like there is some type of flare there but its just paint with no flares.
  6. 03-19-2010 07:27 PM - permalink
    nice jeep you got there, it's beautiful!
  7. sgtskid
    03-16-2010 04:21 PM - permalink
    no problem man hit me up anytime
  8. sgtskid
    03-15-2010 06:21 PM - permalink
    thanks, i just put them in about 20 minutes ago. Went and got a full tank a gas and added some injector cleaner and fuel treatment just to be sure. This was in addition to cleaning the injectors before putting them in. Now to see how it affects gas mileage. Idle is better and acceleration seems smoother. Could be mental though
  9. ceejay612
    03-11-2010 07:26 AM - permalink
    i do still have a very slight vibration even after the TC drop, shackles and wedges. im going this weekend to buy a front DS and most likely ordering an sye.
  10. x91j
    03-10-2010 04:13 PM - permalink
    I went to hobby lobby then went to pepboys for the spray adhesive. Its like a spray can. And roof rack I only used screws

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.