1989 comanche- PO fiddled with engine harness
#1
Newbie
Thread Starter
Join Date: Nov 2014
Location: Surrey
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Comanche
Engine: 4.0
1989 comanche- PO fiddled with engine harness
New here, my 1989 comanche eliminator 4.0 5spd swb will run for a few minutes all nice and then just chug out timing goes weird then it stalls. Pumping brakes saves its from stalling. Disconnected vacuum lines to brake booster and clamped them. Pumping brakes still saves it from stalling out. Opened wiring harness and did cruisers ground upgrade. Now wont start. So. Here i am. Any help counts thanks!
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Look at the hose to the MAP sensor from the throttle body.
Ever been to my website www.cruiser54.com?
Ever been to my website www.cruiser54.com?
Thread
Thread Starter
Forum
Replies
Last Post
70hemicuda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
04-23-2016 08:24 PM
GrandXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-19-2016 09:22 PM
dakinejb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-16-2016 06:48 AM
Shawn Clark
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
04-15-2016 03:13 AM
steven.berry88
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
03-17-2016 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)