Im looking for a set of 19lb mustang injectors. Its for a 93 cherokee that my bud is racing and we plan to build a 4.6 for it later. I think 19lb will work good unless anyone else has a better set. Haha any input highly appreciated

 

You'll need to get a set of EV6 connections to splice into your current EV1 connections (I can get a set for you if you want), but if you're interested, I have a set of the Ford #849 "High Flow" injectors. They flow at 24lbs/hr. $60 shipped for the injectors, $70 with the connections.

 

How would they do on a 4.6 running WOT for majority of its run time? Haha

 

I would think pretty well. I can tell you that a lot of guys who race their V8 Mustang's use them.

 

I know this isnt my thread but I was thinking maybe the Ford "blue stick" 715 injectors would be a better choice here. They would accomplish the same thing but not require switching the electrical plugs. They don't use the clip-nuts which seems to bother some people but they've been used in 10's of millions of vehicles without clip-nuts for decades with no problem. I've run multuple sets of these and the yellow 710 versions in my own Jeep and they are fine.

 

^^ Yeah, the 715's would be better since you don't have to swap in the other connections. Just trying to clean out the garage. I have all 6 connections BTW, should you want the 849's.

 

Id like to stay away from swapping the connectors. So 715s would be awesome. So anyone have a set that they are willing to part with for a great cause? Haha

 

I understand. all it is is cutting the wires and splicing the new connections in - not hard at all. I'll see if I can find a set of the 715's for you.

 

What cars came with the 715s?