Skyjacker 4.5" Track Bar
Thread Starter
CF Veteran
Joined: Feb 2009
Posts: 1,184
Likes: 4
From: Ohio
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
Well the mount makes it mount over the steering so you get more clearance and the axle mounting point is higher. but, I guess you could take it off and mount it with out it. It has a regular bushing on the other side. I never got a chance to install it cause my lifts are over 6.5" and it i made for a 4.5" max.
The Trac-Bar locates the body in relation to the axle. When lifted the axle shifts off center. This is definitely noticeable with lifts over 2 inches. If your vehicle is already lifted view it from the front and see if the tires are centered underneath the body. Some lift kits come with a bracket to lower the stock bar at the frame mounting point and some offer a bracket that bolts to the axle. You may get too much or not enough body shift using these type of brackets. Stress created by the extra leverage of the longer bracket can also lead to stress cracks in the frame rail. The axle mount brackets never stay tight, and actually lowers the axle mounting point, putting the track bar in a worse angle. By using a adjustable Trac-bar you can get rid of those problems plus it can be adjusted for you application. This one uses a bracket to make mounting point higher but you could use it with out the bracket as well. It just bolts into the bushing that would bolt to the axle.
Originally Posted by clayton3854
what does a trac bar do and is it recomended? i just got a 4.5" lift last week
Last edited by bigbadxj; May 31, 2009 at 02:29 PM.
CF Veteran
Joined: Jul 2008
Posts: 1,265
Likes: 0
From: North Olmsted, OH
Year: 1998
Model: Cherokee
Engine: 4.0
I got a 3.5" RE lift this would probably be perfect for me since it actually sits at about 4" right?
Shipping to 44145?
Didn't realize you were also in OH possibly around Cleveland??
Thanks!
Shipping to 44145?
Didn't realize you were also in OH possibly around Cleveland??
Thanks!
can you get me a part number for just the bracket. i don't need it for my track bar but it allows you to mount the steering stabilizer higher up for use with my cross over steering. if not don't worry i will just go to a dealer and find it
Trending Topics
Thread Starter
CF Veteran
Joined: Feb 2009
Posts: 1,184
Likes: 4
From: Ohio
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
Originally Posted by a1racer
can the mount be seperated or does it have to be sold as a unit
Thread Starter
CF Veteran
Joined: Feb 2009
Posts: 1,184
Likes: 4
From: Ohio
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



