Version 3 of the center console...still finishing the details.

Cav Fab 3 link and crossover steering is on its way ! YEEHAW!

Love it when the brown Santa shows up!

I love it when the parts guy shows up! Rubicon express TB, brace and bracket. M.o.r.e steering brace, RT off-road diff cover, jcr steering spacer, rusty 6.5"coils

Well brought home a new to me trailer today. Got a price I couldn't pass up. Needs some work, but easy stuff. It's a 22ft rollback deck on a gooseneck frame and a pair of 5k lb tandem axles.

Picked up my crossover steering today!

From 31 10.5s to 33 12.5s on 4" not sure on wheel backspacing. It runs the control arms at full turn. Some spacers will fix that. It also just barely tags the flares. Nobdoubt will rub bad when flexing. I am doing the cut n fold anyways, so not to worried about that right now.

Got a new windshield in. Some minor rust on the windshield frame.

Getting some quality grinder time in.

Track bar and frame brace are in. I got 3/4 wrench stuck on the bolt head inside the bracket.....so I called it a night.

Damn! Comanche looks like a beast on those 33s. Very nice!

Thanks! Wait till i get the cut n fold, the 3 link, and the 4.5" springs under it. Going for the low/sleeper look with a good amount of droop and proper bumpstops!

Let's have some Cav-Fab steering fun shall We!
The knuckles and arm need to be drilled out to a 5/8 size. This can be done without removing the arm or knuckles



My finger indicated where the knuckle or pitman arm goes

Passenger side:


Drivers side:


Pitman arm

Annnnd a mock up Below pitman arm
Over the arm

Looks great. I love mine. Also have it over the arm.