Project Patience....a 90 MJ DD/Trail Sleeper.
#64
CF Veteran
Thread Starter
I love it when the parts guy shows up! Rubicon express TB, brace and bracket. M.o.r.e steering brace, RT off-road diff cover, jcr steering spacer, rusty 6.5"coils
Last edited by WyoCherokee; 03-21-2017 at 07:59 PM.
#65
CF Veteran
Thread Starter
Well brought home a new to me trailer today. Got a price I couldn't pass up. Needs some work, but easy stuff. It's a 22ft rollback deck on a gooseneck frame and a pair of 5k lb tandem axles.
#67
CF Veteran
Thread Starter
From 31 10.5s to 33 12.5s on 4" not sure on wheel backspacing. It runs the control arms at full turn. Some spacers will fix that. It also just barely tags the flares. Nobdoubt will rub bad when flexing. I am doing the cut n fold anyways, so not to worried about that right now.
Last edited by WyoCherokee; 04-02-2017 at 01:10 PM.
#70
CF Veteran
Thread Starter
Track bar and frame brace are in. I got 3/4 wrench stuck on the bolt head inside the bracket.....so I called it a night.
#72
CF Veteran
Thread Starter
#73
CF Veteran
Thread Starter
Let's have some Cav-Fab steering fun shall We!
The knuckles and arm need to be drilled out to a 5/8 size. This can be done without removing the arm or knuckles
My finger indicated where the knuckle or pitman arm goes
Passenger side:
Drivers side:
Pitman arm
The knuckles and arm need to be drilled out to a 5/8 size. This can be done without removing the arm or knuckles
My finger indicated where the knuckle or pitman arm goes
Passenger side:
Drivers side:
Pitman arm