I lifted my 90 5" or so. I put the front brake lines off the 2500 Chevy (thanks to this site for that gem) and immediately munched the pass side with the tire. I replaced the line today and used a spring with a couple zip ties to pin it back. I drilled a 7/32 hole (was first sharp bit I grabbed) in the coil spring mount as an attachment point. I had the springs in my hardware cabinet, no telling what they are from. What do you guys think? Better ideas?

 

get the biggest zip tie you got and zip tie it LOOSELY around the base of the shock. thats what i always did.

 

I thought of that, but was worried about it chaffing the line.