When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We decided to install ZJ springs and a 1" spacer instead of using the 2" budget lift spacer and stock springs, we had on his other xj. surprisingly the front end has much smoother ride to it.
We decided to install ZJ springs and a 1" spacer instead of using the 2" budget lift spacer and stock springs, we had on his other xj. surprisingly the front end has much smoother ride to it.
that's funny cause that is exactly what I doin. But for the rear, I plan on making some bastard packs. Do u have any pic of urs?
Prepping for a Bastard Pack lift. Got the leafs buffed off and painted. Also installed a new rear hatch, and am doing some body painting/rust prevention. The Jeep is going to look good after everything's finished
Toyo Open Country M/T
Goodyear MT/R-K
BFG AT KO2 (reluctantly)
Maxxis Trepador
Mickey Thompson Baja MTZ
Every time I think I've decided, I find something new about one of them
If that was the list I was working with, I'd cut it right between the MT/R-K or the MTZ.
Originally Posted by roninofako
Have you looked at the Cooper STT Pros yet?
I run the straight STT, and love them...thinking of moving to the pro series next round. BTW I've been through 2 sets in 3 states, so they've seen it all. Great tire at a reasonable price.
Yesssss. I want to try out the STT Pro's but my MTZ's are still like 85% tread lol. Cooper makes Mickey tires so it's probably similar to the MTZ anyway.
Replaced the rear main seal- what a nasty job!
This after replacing O rings in filter housing and new valve cover & gasket.
Hoping for a leak free Jeep
