Four Corners Colorado, New Mexico, Utah & Arizona

New Mexico Roll Call.

Thread Tools
 
Search this Thread
 
Old Dec 18, 2014 | 11:53 AM
  #11941  
xj 4-play's Avatar
Junior Member
 
Joined: Nov 2010
Posts: 80
Likes: 0
From: Albuquerque, NM
Year: 1996
Model: Cherokee
Engine: 4.0HO
Default

Originally Posted by hbracing13

Actually doing it is easy, its just setting the head on is a pain. I didnt have any dowel pins on my block so that what make it really hard as the gasket wanted to slide around. And I also installed it with the intake and exhaust too since I its easier to do them off the jeep where you can get to the bolts easy, but it adds more weight to a 60 pound head and then the reach over the fenders and grille.
Would a cherry picker help? I'm replacing the exhaust manifold at the same time as well.
Reply
Old Dec 18, 2014 | 11:58 AM
  #11942  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

It does help. I just didn't want to move my crap out if the way to set to it up. I should of just used it but maybe next time I have two more to do anyways.
Reply
Old Dec 22, 2014 | 01:58 PM
  #11943  
mathew220's Avatar
Newbie
 
Joined: Nov 2014
Posts: 13
Likes: 0
Model: Cherokee
Default albuqueruque here

2000 Red Jeep Cherokee. semi stock.
Reply
Old Dec 22, 2014 | 02:42 PM
  #11944  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Welcome to the island of forgotten toys.
Reply
Old Dec 23, 2014 | 01:34 PM
  #11945  
PurpleToxin505's Avatar
CF Veteran
 
Joined: Sep 2013
Posts: 2,820
Likes: 5
From: Albuquerque, NM
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Forgotten toys? **** alot of people travel here to get a rust free jeep
Reply
Old Dec 23, 2014 | 02:58 PM
  #11946  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Originally Posted by PurpleToxin505
Forgotten toys? **** alot of people travel here to get a rust free jeep
You mean rust free vehicle in general.
Reply
Old Dec 30, 2014 | 12:48 AM
  #11947  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

For sale for the people who don't have a fb. Guy i know selling Dana 60 front and rear with 4.10s both locked 4 linked set up for cherokee with 8x6.5 lugs. 600 for the front, 400 for the rear. Brand new 8 inch springs and leafs skyjacker brand I believe for 800 yes I know it's and high price. 50 gallon gas tank with pump, dual filters he didn't say a price on it, but make offer. Teraflex 4 to 6 inch kit springs with pucks, shackle and blocks and two shocks for 175. Rusty upper adjustable arms make offer, teraflex long arms older style without heim joints need bushings. No brackets make offer. Everything is obo he's on leave and he heading back on the 1st. Also a set of 4, 42s for 1800 with matching of rims 8x6.5. Oh remembered something else a stroker motor forged internals, three angle Valve job from Edwards engines. Dual alt set up. Has over 5 grand into motor didn't say price either.

Last edited by hbracing13; Dec 30, 2014 at 12:53 AM.
Reply
Old Dec 30, 2014 | 01:44 AM
  #11948  
NFJ79's Avatar
Member
 
Joined: Jan 2013
Posts: 231
Likes: 0
From: Albuquerque, NM
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default

I know someone wants to buy these!

http://albuquerque.craigslist.org/pts/4824916975.html

I'll let them go for $130 if you mention you found this ad on CF.
Reply
Old Dec 30, 2014 | 10:06 AM
  #11949  
curts97's Avatar
Member
 
Joined: Feb 2013
Posts: 135
Likes: 0
From: albuquerque
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by hbracing13
For sale for the people who don't have a fb. Guy i know selling Dana 60 front and rear with 4.10s both locked 4 linked set up for cherokee with 8x6.5 lugs. 600 for the front, 400 for the rear. Brand new 8 inch springs and leafs skyjacker brand I believe for 800 yes I know it's and high price. 50 gallon gas tank with pump, dual filters he didn't say a price on it, but make offer. Teraflex 4 to 6 inch kit springs with pucks, shackle and blocks and two shocks for 175. Rusty upper adjustable arms make offer, teraflex long arms older style without heim joints need bushings. No brackets make offer. Everything is obo he's on leave and he heading back on the 1st. Also a set of 4, 42s for 1800 with matching of rims 8x6.5. Oh remembered something else a stroker motor forged internals, three angle Valve job from Edwards engines. Dual alt set up. Has over 5 grand into motor didn't say price either.
I'm interested in the Rusty's uca's. What's the condition they are in?
Reply
Old Dec 30, 2014 | 12:32 PM
  #11950  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Originally Posted by curts97
I'm interested in the Rusty's uca's. What's the condition they are in?
They are in decent condition still the rubber still looked good they are the older rusty arms so didn't have the jam nuts like the newer styles.
Reply
Old Dec 30, 2014 | 12:43 PM
  #11951  
curts97's Avatar
Member
 
Joined: Feb 2013
Posts: 135
Likes: 0
From: albuquerque
Year: 1997
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by hbracing13
They are in decent condition still the rubber still looked good they are the older rusty arms so didn't have the jam nuts like the newer styles.
Nvm. Had a bill pop up I for got about. I'll have to pass for now. Thank you though

Last edited by curts97; Dec 30, 2014 at 03:06 PM.
Reply
Old Dec 30, 2014 | 03:08 PM
  #11952  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Originally Posted by curts97
60$?
He said 40 so your good. I'll pm you his number.

I just seen it now that you edit it.

Last edited by hbracing13; Dec 30, 2014 at 03:13 PM.
Reply
Old Jan 17, 2015 | 11:36 PM
  #11953  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Hhhhhheeeeelllllllllloooooooooooo wake up ****ers.
Reply
Old Jan 18, 2015 | 10:10 AM
  #11954  
ocs1667's Avatar
Member
 
Joined: Sep 2008
Posts: 116
Likes: 0
From: Sandia Park New Mexico between Sante Fe/Albuquerque
Year: 1989 sport 2 door
Model: Cherokee
Engine: 4.8 chev V-8 2006 300hp 330 torque
Default

East Mtns. 1st post. Just updated steering with 98 Durango box and more. Unbelievable improvement.

Upgrading brakes with WJ booster and master cylinder along with guts from 98 zj. {installs into 89 proportioning valve} Discs all 4 wheels. Stock valve, booster and master cylinder not able to handle discs all 4 wheels.

89 2 door
4.8 03 Chev. V8 4l60 chev. trans 8.8 Ford rear end 88 GW Dana 44 fr. diff.
Only fail when you stop trying.

Last edited by ocs1667; Jan 18, 2015 at 10:17 AM.
Reply
Old Jan 18, 2015 | 02:20 PM
  #11955  
cruiser54's Avatar
::CF Moderator::
 
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by ocs1667
East Mtns. 1st post. Just updated steering with 98 Durango box and more. Unbelievable improvement.

Upgrading brakes with WJ booster and master cylinder along with guts from 98 zj. {installs into 89 proportioning valve} Discs all 4 wheels. Stock valve, booster and master cylinder not able to handle discs all 4 wheels.

89 2 door
4.8 03 Chev. V8 4l60 chev. trans 8.8 Ford rear end 88 GW Dana 44 fr. diff.
Only fail when you stop trying.
So, you haven't done it yet?
Reply



All times are GMT -5. The time now is 07:21 AM.