Jeep Cherokee Forum
Notice a shock upper mount pocket missing, it's still attached to the shock
Notice a shock upper mount pocket missing, it's still attached to the shock
0 2011/08/05 21:11:30
Now we are in line and attached, lets add some strenght
Now we are in line and attached, lets add some strenght
0 2011/08/05 21:11:30
Lookin better, now overlap plate it into place
Lookin better, now overlap plate it into place
0 2011/08/05 21:04:32
Now lets get that frame section aligned
Now lets get that frame section aligned
0 2011/08/05 21:04:32
Beam into place and attached to the re enforced box of the rear shackel
Beam into place and attached to the re enforced box of the rear shackel
0 2011/08/05 21:04:32
Still room for the hoses to pass thru
Still room for the hoses to pass thru
0 2011/08/05 21:04:32
Lets make a beam of the box, install some wedge plates on the inside,
Lets make a beam of the box, install some wedge plates on the inside,
0 2011/08/05 21:04:32
This is a frame section. So make the box into a beam
This is a frame section. So make the box into a beam
0 2011/08/05 20:58:06
test the fit
test the fit
0 2011/08/05 20:58:06
Build a box for the gas tank fill hose
Build a box for the gas tank fill hose
0 2011/08/05 20:58:06
Lets get some new material into that shackel box, rear leaf driver side.
Lets get some new material into that shackel box, rear leaf driver side.
0 2011/08/05 20:58:06
Something is not quite right here. Oh there seems to be som misalignment?
Something is not quite right here. Oh there seems to be som misalignment?
0 2011/08/05 20:58:06
Don't be stingy with the paint, get a gallon
Don't be stingy with the paint, get a gallon
0 2011/08/05 20:51:56
this is driver side floor in mid construction
this is driver side floor in mid construction
0 2011/08/05 20:51:56
Passenger rocker tube is in
Passenger rocker tube is in
0 2011/08/05 20:51:56
Driver side floors looking good, some flat black rust paint, slap it in with a brush
Driver side floors looking good, some flat black rust paint, slap it in with a brush
0 2011/08/05 20:51:56
Passenger floors shaping up
Passenger floors shaping up
0 2011/08/05 20:51:56
I had severl precut sizes to choose from prepared before I started this project. Use a cutting disc on grinder to trim to length and size. (get a full stack of discs)
I had severl precut sizes to choose from prepared before I started this project. Use a cutting disc on grinder to trim to length and size. (get a full stack of discs)
0 2011/08/05 20:42:27
We can see the frame rail, rocker tube, flooring, and spring mount box.
We can see the frame rail, rocker tube, flooring, and spring mount box.
0 2011/08/05 20:42:27
Don't forget to weld the underside seams also.
Don't forget to weld the underside seams also.
0 2011/08/05 20:42:27
Passenger side, that's 1.5" width under the frame lip and overlapped with 5 5/8" width but to the rocker tube.
Passenger side, that's 1.5" width under the frame lip and overlapped with 5 5/8" width but to the rocker tube.
0 2011/08/05 20:42:27
Lets start to get some floors in the Peep
Lets start to get some floors in the Peep
0 2011/08/05 20:42:27
Hey not bad. That is a 3/16 x 2 x 6 HSS tube with 16ga caps on ends.
Hey not bad. That is a 3/16 x 2 x 6 HSS tube with 16ga caps on ends.
0 2011/08/05 20:35:39
Inside too. This is passenger side
Inside too. This is passenger side
0 2011/08/05 20:35:39
Cut all the rot off below the tape.IMG 1768
Cut all the rot off below the tape.IMG 1768
0 2011/08/05 20:35:39
Using 16ga HRS for this project (1/16 thk) 2 - 3 overlap layers in many locations
Using 16ga HRS for this project (1/16 thk) 2 - 3 overlap layers in many locations
0 2011/08/05 20:35:39
Lets get a cap on that spring mount box.
Lets get a cap on that spring mount box.
0 2011/08/05 20:35:39
This is a good start, don't stop yet.
This is a good start, don't stop yet.
0 2011/08/05 20:19:19
Yes it was broke. Are we having fun yet?
Yes it was broke. Are we having fun yet?
0 2011/08/05 20:19:19
Passenger, front leaf perch, aligned and reattached. Reattached??
Passenger, front leaf perch, aligned and reattached. Reattached??
0 2011/08/05 20:19:19
Better have one of these
Better have one of these
0 2011/08/05 20:19:19
How about a sturdy rocker?
How about a sturdy rocker?
0 2011/08/05 20:19:19
Cleaned out the stock frame rails and some flat black rust paint installed.
Cleaned out the stock frame rails and some flat black rust paint installed.
0 2011/08/05 20:13:21
Really starting to lighten up the load
Really starting to lighten up the load
0 2011/08/05 20:13:21
Wasn't that supposed to be attached?
Wasn't that supposed to be attached?
0 2011/08/05 20:13:21
Tarp into the dash, get some floor metal out of the way. Sore bones on this rig
Tarp into the dash, get some floor metal out of the way. Sore bones on this rig
0 2011/08/05 20:13:21
Tie the front carpet up to the wheel, consol is still in
Tie the front carpet up to the wheel, consol is still in
0 2011/08/05 20:13:21
Just wait, you aint seen nothin yet
Just wait, you aint seen nothin yet
0 2011/08/05 20:08:22
Lookin sweet
Lookin sweet
0 2011/08/05 20:08:22
Under the rear carpet
Under the rear carpet
0 2011/08/05 20:08:22