Jeep Cherokee Forum
Side view, more bracing to come.
Side view, more bracing to come.
0 2012/05/14 17:30:54
Some rear bracing added and more fasteners, stainless.
Some rear bracing added and more fasteners, stainless.
0 2012/05/14 17:30:54
1st mounting, bracing to come.
1st mounting, bracing to come.
0 2012/05/14 17:30:54
Outdoors 1st mounting
Outdoors 1st mounting
0 2012/05/14 17:30:54
Rear still open, bracing to come.
Rear still open, bracing to come.
0 2012/05/14 17:26:30
1st fit up
1st fit up
0 2012/05/14 17:26:30
Marking the front and rear crossovers to accept the rack base bars and side tubes.
Marking the front and rear crossovers to accept the rack base bars and side tubes.
0 2012/05/14 17:26:30
Laying out the stock roof crossovers
Laying out the stock roof crossovers
0 2012/05/14 17:26:30
Build the Peep somethin nice for long and loyal service
Build the Peep somethin nice for long and loyal service
0 2012/05/08 18:35:06
Bolt one end prior to moving on to next holes
Bolt one end prior to moving on to next holes
0 2012/05/08 18:35:06
Secure your work and back grind your bit webb to relieve chips
Secure your work and back grind your bit webb to relieve chips
0 2012/05/08 18:35:06
Drill base bars together for holes lineup
Drill base bars together for holes lineup
0 2012/05/08 18:31:06
Round to Angle end transitions
Round to Angle end transitions
0 2012/05/08 18:31:06
These will assemble at corners
These will assemble at corners
0 2012/05/08 18:31:06
Is this layout starting to look familiar
Is this layout starting to look familiar
0 2012/05/08 18:31:06
Assembly will be on top of stock rack crossovers
Assembly will be on top of stock rack crossovers
0 2012/05/08 18:31:06
My 2006 season 81 Chev Monte Carlo Thunder Car build. And you think Jeep is a money pit? Couple wins, one feature, weekly top runner, 5th overall for season and Sportsmanship trophy. lots of work, lots of fun to build.
My 2006 season 81 Chev Monte Carlo Thunder Car build. And you think Jeep is a money pit? Couple wins, one feature, weekly top runner, 5th overall for season and Sportsmanship trophy. lots of work, lots of fun to build.
0 2012/04/27 19:11:33
Stitch doin the tuggin.
Stitch doin the tuggin.
0 2012/04/27 19:11:33
The clean way round.
The clean way round.
0 2012/04/27 19:11:33
Shined up for the show. This is the next life for rolled XJ's.
Shined up for the show. This is the next life for rolled XJ's.
0 2012/04/27 19:11:33
Stitch's other jeep, closin on 500hp, 5.0 Ford power. Loves to explode sideways with pedal down in 3rd. So hot, not your mothers YJ.
Stitch's other jeep, closin on 500hp, 5.0 Ford power. Loves to explode sideways with pedal down in 3rd. So hot, not your mothers YJ.
0 2012/04/27 19:11:33
1 inch Stainless Spacers plus M8-1.25 x 45mm When running blocks this completes the shock back to normal operating position and range.
1 inch Stainless Spacers plus M8-1.25 x 45mm When running blocks this completes the shock back to normal operating position and range.
0 2012/03/18 17:30:02
Sensatrac Standard and Load Assist Type, plus 80000 miles, 7" stroke (13 - 20 inch)
Sensatrac Standard and Load Assist Type, plus 80000 miles, 7" stroke (13 - 20 inch)
0 2012/03/18 17:30:02
Ive seen some bring it right up onto the axle, remember there is a lip seal inside the housing, watch the heat.
Ive seen some bring it right up onto the axle, remember there is a lip seal inside the housing, watch the heat.
0 2011/10/15 16:22:33
Nice extra clear under the axle
Nice extra clear under the axle
0 2011/10/15 16:22:33
That Monroe Sensitrac with Load Assist spring fits like a glove
That Monroe Sensitrac with Load Assist spring fits like a glove
0 2011/10/15 16:22:33
Shoot it with rust paint
Shoot it with rust paint
0 2011/10/15 16:22:33
Weld complete, even a little inside at top as torch will fit
Weld complete, even a little inside at top as torch will fit
0 2011/10/15 16:07:02
Tack in place
Tack in place
0 2011/10/15 16:07:02
Check your fit and sand bevel on edge to assist weld penatration
Check your fit and sand bevel on edge to assist weld penatration
0 2011/10/15 16:07:02
Trim back 1/2 to 5/8 inch
Trim back 1/2 to 5/8 inch
0 2011/10/15 16:07:02
Clean for welding, mark 1/2 way up, cut with zip disc.
Clean for welding, mark 1/2 way up, cut with zip disc.
0 2011/10/15 16:07:02
A little extra clearance in the wheel wells, 19" clear under the rockers, no back seat or carpets yet, noisy!
A little extra clearance in the wheel wells, 19" clear under the rockers, no back seat or carpets yet, noisy!
0 2011/08/21 15:29:15
4 weeks after we started the FrankenPeep has new floors, Tube ROCKers, boxed frame rails, reenforced perch points, and back on the move.
4 weeks after we started the FrankenPeep has new floors, Tube ROCKers, boxed frame rails, reenforced perch points, and back on the move.
0 2011/08/21 15:29:15
With 3.5 lift on 31's, there is 19" clear under the lowest point of the rockers tubes. The FrankenPeep has it's shoes back on.
With 3.5 lift on 31's, there is 19" clear under the lowest point of the rockers tubes. The FrankenPeep has it's shoes back on.
0 2011/08/21 03:42:45
Ready to put the seats back in.
Ready to put the seats back in.
0 2011/08/21 03:42:45
the inside story
the inside story
0 2011/08/20 19:46:14
Fix for front quarter panel rot.
Fix for front quarter panel rot.
0 2011/08/20 19:46:14
installed, adjusted back door, much tighter fit when closed
installed, adjusted back door, much tighter fit when closed
0 2011/08/20 19:46:14
door to cover gas hose clamps access
door to cover gas hose clamps access
0 2011/08/20 19:46:14