Jeep Cherokee Forum
0 2016/10/10 16:01:56
0 2016/10/11 02:49:25
0 2016/10/27 00:46:20
0 2016/10/27 00:46:52
Been dragging my 33 around for a couple of years now.
Been dragging my 33 around for a couple of years now.
0 2016/10/28 21:36:27
0 2016/10/28 21:37:34
Engine is coming together. Slowly. Need to get the intake blasted before i can proceed.
Engine is coming together. Slowly. Need to get the intake blasted before i can proceed.
0 2016/10/28 23:19:34
This guy is ready to go. New seals, filter, AN fitting adapters and not pictured speedo cable, braded stainless dipstick and +2 quart pan
This guy is ready to go. New seals, filter, AN fitting adapters and not pictured speedo cable, braded stainless dipstick and +2 quart pan
0 2016/10/28 23:20:07
Wth all the holes in the firewall the rust was taking over.
Wth all the holes in the firewall the rust was taking over.
0 2016/10/28 23:20:54
0 2016/10/28 23:21:08
There painted now and i need to get a filtration system for my compressor. Rattle can cost is adding up.
There painted now and i need to get a filtration system for my compressor. Rattle can cost is adding up.
0 2016/10/28 23:21:38
Trying to get grill off the list so i can start on the interior plastics.
Trying to get grill off the list so i can start on the interior plastics.
0 2016/10/28 23:22:36
0 2016/10/28 23:23:38
0 2016/10/30 10:08:22
0 2016/11/06 23:34:59
0 2016/11/06 23:35:22
Got some parts in the mail this week. The armrests are frikin nice with the chrome bases. Scored a full heater box setup and a complete wiper sysrem. Seller is building a Wally Booth tribute Hornet. Haggling with him over a few other items to.
Got some parts in the mail this week. The armrests are frikin nice with the chrome bases. Scored a full heater box setup and a complete wiper sysrem. Seller is building a Wally Booth tribute Hornet. Haggling with him over a few other items to.
0 2016/11/06 23:35:47
0 2016/11/06 23:37:07
Engine is in. Didn't take very many pics. Its just bolted down for now. Need to come up with a better solution to its location and mounts. Motor mounts are offset 2.5 inches and jenky as heck. I know i want it to go down and forward some. Not sure how much yet.
Engine is in. Didn't take very many pics. Its just bolted down for now. Need to come up with a better solution to its location and mounts. Motor mounts are offset 2.5 inches and jenky as heck. I know i want it to go down and forward some. Not sure how much yet.
0 2016/11/06 23:37:29
Still working away here and there on the grile. Need to get on it so I can start the interior pieces.
Still working away here and there on the grile. Need to get on it so I can start the interior pieces.
0 2016/11/06 23:58:35
0 2016/11/07 00:03:57
0 2016/11/17 17:59:07
0 2016/11/17 17:59:46
0 2016/11/17 18:00:28
0 2016/11/17 18:00:54
With the low bucket seat the steering colunm/wheel were awkward. I picked up an XJ tilt colunm from the jy last weekend.
With the low bucket seat the steering colunm/wheel were awkward. I picked up an XJ tilt colunm from the jy last weekend.
0 2016/11/21 00:02:48
Took a little modification but its in and working.
Took a little modification but its in and working.
0 2016/11/21 00:03:13
Didnt want to deal with a helper so I used ratchet straps to remove the door.
Didnt want to deal with a helper so I used ratchet straps to remove the door.
0 2016/11/21 00:03:28
The old bushings were smoked.
The old bushings were smoked.
0 2016/11/21 00:03:40
Made up my mind on where the engine needs to be. Workng on buffing up the front crossmember/motor mounts. Still undecided on solid motor mounts or not.
Made up my mind on where the engine needs to be. Workng on buffing up the front crossmember/motor mounts. Still undecided on solid motor mounts or not.
0 2016/11/21 00:04:05
Can upload one pic without it crashing. Didn't do anything to the Gremlin this weekend. The Jeep needs some attention. I see snow on the hill so its R&M.
Can upload one pic without it crashing. Didn't do anything to the Gremlin this weekend. The Jeep needs some attention. I see snow on the hill so its R&M.
0 2016/12/05 12:10:18
0 2016/12/17 17:50:14
Finally put Ralph's belt back on after he sucked in the battery charger. Its been over six months since that happend. Projects...... I put a headlight harness that i slapped together a while back.
Finally put Ralph's belt back on after he sucked in the battery charger. Its been over six months since that happend. Projects...... I put a headlight harness that i slapped together a while back.
0 2017/01/14 11:30:57
Can't wait until spring.
Can't wait until spring.
0 2017/01/24 07:38:00
0 2017/01/24 07:39:32
Adding a tow bar, JKS discos, bending the bumper back, reaming out knuckles and new tie rod ends.
Adding a tow bar, JKS discos, bending the bumper back, reaming out knuckles and new tie rod ends.
0 2017/02/19 02:30:25
End result of the insert on my pitman arm. Thought I would share.
End result of the insert on my pitman arm. Thought I would share.
0 2017/03/07 22:46:26
I picked these three fronts from Craigslist for $50. Two tires are matching and in great shape. They fit the car alot nicer then the others.
I picked these three fronts from Craigslist for $50. Two tires are matching and in great shape. They fit the car alot nicer then the others.
0 2017/03/09 01:59:55
Got these knock offs for $70. Impulse buy. Probably going to resell.
Got these knock offs for $70. Impulse buy. Probably going to resell.
0 2017/03/09 02:00:29
Safety first
Safety first
0 2017/03/09 02:00:48