Modified Grand Cherokee Tech. All ZJ,WJ & WK aftermarket tech goes here All Modified, NON-OEM tech goes here. IE:Aftermarket Lifts, Shocks, Tires, Performance, etc..

Finished My Taurus fan install

Thread Tools
 
Search this Thread
 
Old 09-14-2015, 09:01 AM
  #16  
CF Veteran
 
Jamie57's Avatar
 
Join Date: Jul 2009
Location: London Ontario Canada
Posts: 1,254
Likes: 0
Received 10 Likes on 10 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Originally Posted by ZJMAX
In total I spent under $100.
Used Fan (pick-n-pull) $35
Used Volvo relay (pick-n-pull) $8
In hose 38mm sensor housing China made (ebay) $6
Temp Switch, wire & Connector (BMW dealer) $40
14mm 1.5 tap USA made (ebay) $5
50amp fuse (had it laying around) free
30/40 amp relay (had it laying around) free


Here are a couple pics, one of the in hose housing and one of the clearances. The clearances are actually about 1" but the photo looks narrower (not sure why).

Max

You wouldn't happen to have the part numbers for this would you?
It seems lately unless you already know those, most parts guys are clueless about anything.
Old 09-14-2015, 10:58 AM
  #17  
Old fart with a wrench
 
dave1123's Avatar
 
Join Date: Nov 2010
Location: Manlius, east of Syracuse, NY
Posts: 14,398
Received 723 Likes on 628 Posts
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

This whole fan install write-up should be in the How-To section. Maybe you could get a moderator to move it.
Old 09-15-2015, 11:43 PM
  #18  
Seasoned Member
Thread Starter
 
ZJMAX's Avatar
 
Join Date: May 2014
Location: Nor Cal
Posts: 371
Likes: 0
Received 2 Likes on 2 Posts
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
Default

Originally Posted by Jamie57
You wouldn't happen to have the part numbers for this would you?
It seems lately unless you already know those, most parts guys are clueless about anything.
I used a BMW dual temp sensor, it's 91°C and 99°C (195°F and 210°F), part number 61311378073 $30
I also used the plug, BMW Part # 61131378410
Found the Connector and wires too, these are dealer prices.
61131378412 Angled Connector $1.18
61130007445 .2-0.5mm Small Wire $1.97 Ea (need 2)
61130007446 0.75mm Big Wire $2.07 Ea

This was used with an ebay inline radiator hose housing. I drilled it out for the proper thread for the sensor.

Max

Last edited by ZJMAX; 06-16-2017 at 01:42 PM.
Old 06-12-2017, 01:12 PM
  #19  
Seasoned Member
Thread Starter
 
ZJMAX's Avatar
 
Join Date: May 2014
Location: Nor Cal
Posts: 371
Likes: 0
Received 2 Likes on 2 Posts
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
Default

I've redrawn the diagram to make it a little clearer to read.


Max
Old 06-13-2017, 05:46 PM
  #20  
Newbie
 
Rascal's Avatar
 
Join Date: Aug 2016
Location: Denmark, Europe
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 5,2 V8 212hp
Default

Thansk man!
Old 07-23-2017, 09:50 AM
  #21  
Newbie
 
Jgcdude1's Avatar
 
Join Date: Aug 2012
Location: Austin Texas
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Grand Cherokee
Engine: 5.2L 318
Default

Question for you, how did you get it to turn on when the AC is triggered?
Old 07-25-2017, 02:10 PM
  #22  
Seasoned Member
Thread Starter
 
ZJMAX's Avatar
 
Join Date: May 2014
Location: Nor Cal
Posts: 371
Likes: 0
Received 2 Likes on 2 Posts
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
Default

I didn't, but if the engine is warm the Efan will be on since the jeeps tend to run around 210 the low side will run most of the time and if it gets over 210 the high side kicks on and really cools it down.

My AC runs cold and the temp gauge is always a little over 200 on my jeep. I have not heard the high side kick on but once or twice on really hot days.

MAx
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
01-31-2024 04:58 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
93XJeeper
Miscellaneous
2
09-09-2015 11:38 AM
synergy58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
09-08-2015 11:51 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Finished My Taurus fan install



All times are GMT -5. The time now is 04:17 AM.