Before lifting my jeep I hit a bump and got death wobble so bad i had to come to complete stop but it only happened when I hit a bump. It got worse to where I couldn't go over 40 mph without it happening. I lifted my jeep and put a new adjustable track bar on and it seemed to be fixed I got it up to 80 and no death wobble but on my way home I hit a bump and it happened again. Everything is tight nothing's lose new lower control arms shocks and coil spring and track Bar. My passenger side wheel has positive camber it sticks out at the top a little bit. But there's no play when I jacked it up so I don't think it's wheel bearing. Any info will help.

 

https://www.cherokeeforum.com/search...archid=7485292

 

thanks

 

The positive camber concerns me are your ball joints good? The camber on these things are fairly fixed also I've seen the asteroid adjustment bolts look really tight on the lower control arm but if you rock the jeep back and forth the bolt may slide in the slot that it runs. Guess how long it took to figure that out.. might I say might be shiny by that bolt would be a good indication. But with it in park get someone to rock it and look under and see