Modified Grand Cherokee Tech. All ZJ,WJ & WK aftermarket tech goes here All Modified, NON-OEM tech goes here. IE:Aftermarket Lifts, Shocks, Tires, Performance, etc..

3 inch bastard lift wj

Thread Tools
 
Search this Thread
 
Old 02-16-2018, 10:07 PM
  #16  
Newbie
 
Twisted.metal's Avatar
 
Join Date: Jan 2018
Posts: 5
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee(SJ)
Default

Originally Posted by riskywhiskey
so im basically finding jack crap about a junkyard wj lift 3+ inches i stopped at an offroad shop by me today and found that 92 f150 springs have a 4 inch diameter and are 15.49 inches long (should fit with the dog ears cut off ) the wj is 4.04 diameter with 16.5 inches long i would assume i would get 0-1 inch lift with these since they are shorter but are much stiffer but i dont think the front coils will fit the rear im at a loss here dont want to spend 500$ or more right now for a 3-3.5 inch lift until summer when money is more available any ideas?

I got 3in Polu spacers on Amazon for like $70. I know a lot of people say not to do that big of a spacer but I love mine. The install was a pain (PA Jeep = rust on everything) but nothing I didn’t expect and we didn’t have a spring compressor. I was able to fit 33’s with a little bit of bumper trimming. I may be partial but I think the 3in spacer kit was enough to make it look pretty badass!
Old 02-16-2018, 10:44 PM
  #17  
Junior Member
Thread Starter
 
riskywhiskey's Avatar
 
Join Date: Feb 2018
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Model: Grand Cherokee(WJ)
Engine: 4.0
Default

Originally Posted by Twisted.metal



I got 3in Polu spacers on Amazon for like $70. I know a lot of people say not to do that big of a spacer but I love mine. The install was a pain (PA Jeep = rust on everything) but nothing I didn’t expect and we didn’t have a spring compressor. I was able to fit 33’s with a little bit of bumper trimming. I may be partial but I think the 3in spacer kit was enough to make it look pretty badass!
im not doin poly lift I'm going with springs I found a set of coils and shocks 2.5 inch lift for 274 and I'm pretty rust free actually I got a couple small holes in the fenders and that's about it a little old...well a big old lady use to own mine
Old 02-17-2018, 09:21 AM
  #18  
Newbie
 
Twisted.metal's Avatar
 
Join Date: Jan 2018
Posts: 5
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee(SJ)
Default

Originally Posted by riskywhiskey
im not doin poly lift I'm going with springs I found a set of coils and shocks 2.5 inch lift for 274 and I'm pretty rust free actually I got a couple small holes in the fenders and that's about it a little old...well a big old lady use to own mine
Its crazy .... the body on mine is rust free other than a small spot on the rocker that I fixed. But underneath was a different story. When I pulled my coils I couldn’t believe how bad they were under the rubbers. I’d like to eventually get new coils too but I’m not ready to mess with the drive shaft and all the other stuff that comes along with going bigger 🙄
Old 02-17-2018, 09:24 AM
  #19  
Newbie
 
Twisted.metal's Avatar
 
Join Date: Jan 2018
Posts: 5
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee(SJ)
Default

Originally Posted by Twisted.metal


Its crazy .... the body on mine is rust free other than a small spot on the rocker that I fixed. But underneath was a different story. When I pulled my coils I couldn’t believe how bad they were under the rubbers. I’d like to eventually get new coils too but I’m not ready to mess with the drive shaft and all the other stuff that comes along with going bigger 🙄
This was new tire day! I rhino lined everything from the middle of the door down and I love it. Good protection!
Old 02-17-2018, 09:30 AM
  #20  
Junior Member
Thread Starter
 
riskywhiskey's Avatar
 
Join Date: Feb 2018
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Model: Grand Cherokee(WJ)
Engine: 4.0
Default

Originally Posted by Twisted.metal

This was new tire day! I rhino lined everything from the middle of the door down and I love it. Good protection!
Im only doing 2.5 coils with a 1/4 leveling kit I should be able to do 235/85/16 on factory if your fitting 33s with a 3 inch the 235s are only 31.76 inches tall and what tire are they...they look like pirelli scorpions almost which is what I'm getting
Old 02-18-2018, 07:34 PM
  #21  
Newbie
 
Twisted.metal's Avatar
 
Join Date: Jan 2018
Posts: 5
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee(SJ)
Default

Originally Posted by riskywhiskey
Im only doing 2.5 coils with a 1/4 leveling kit I should be able to do 235/85/16 on factory if your fitting 33s with a 3 inch the 235s are only 31.76 inches tall and what tire are they...they look like pirelli scorpions almost which is what I'm getting
They’re Dick Cepek Extreme Country. Reasonably priced and honestly the best tires I’ve ever had. I can’t say enough good things about them and I’m not easily impressed. They’re pretty loud which may bother some people but I love the sound of my tires singing lol
Old 02-19-2018, 04:04 PM
  #22  
Junior Member
Thread Starter
 
riskywhiskey's Avatar
 
Join Date: Feb 2018
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Model: Grand Cherokee(WJ)
Engine: 4.0
Default

Originally Posted by Twisted.metal

They’re Dick Cepek Extreme Country. Reasonably priced and honestly the best tires I’ve ever had. I can’t say enough good things about them and I’m not easily impressed. They’re pretty loud which may bother some people but I love the sound of my tires singing lol
do they measure true 33 or are they the 33s that measure at 31.9 lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sethxj
Modified XJ Cherokee Tech
17
05-08-2017 04:11 AM
Sethxj
Modified XJ Cherokee Tech
3
05-06-2017 10:34 AM
C H E R O K E E 98XJ
Modified XJ Cherokee Tech
6
05-14-2013 03:23 PM
JeepHeepYoda
Cherokee Chat
5
01-20-2012 03:35 PM
Jackillac92
Cherokee Chat
2
11-01-2009 09:51 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 3 inch bastard lift wj



All times are GMT -5. The time now is 11:49 AM.