Wire run to rear bumper
01-15-2024, 12:13 PM
#1
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 2
Received 0 Likes
on
0 Posts
Year: 2017
Model: Cherokee (KL)
Engine: 3.6L
Wire run to rear bumper
Hello all,
I've purchased a dash cam that doubles as a rear view camera... so I need to run a wire from the dash to the rear bumper in my 2017 KL Trailhawk.
Any ideas how best to exit the cargo / trunk area and get access to somewhere around the license plate?
...before I start randomly drilling
reference:
I've purchased a dash cam that doubles as a rear view camera... so I need to run a wire from the dash to the rear bumper in my 2017 KL Trailhawk.
Any ideas how best to exit the cargo / trunk area and get access to somewhere around the license plate?
...before I start randomly drilling
reference:
01-16-2024, 05:26 PM
#2
Junior Member
Join Date: Apr 2023
Posts: 71
Likes: 0
Received 12 Likes
on
12 Posts
Year: 2015 & 2016
Model: Cherokee (KL)
Engine: 2.4 & 3.2
look for videos on youtube regarding installation of an aftermarket trailer brake lights so you get a good idea.
there are rubber grommets under the plastic cover here the spare tire is at that can be used to run wires underneath the cherokee. other option is for you to start moving side panes to run the wire through the inside.
there are rubber grommets under the plastic cover here the spare tire is at that can be used to run wires underneath the cherokee. other option is for you to start moving side panes to run the wire through the inside.
The following users liked this post:
vectorboss (01-18-2024)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)