Have a dana 30 ring and pinion set 4.10 ratio and 4.10 carrier. Shoot me a Reasonable offer, you know the prices for a new set and carrier

 

Standard or Reverse Cut?

 

Pictures coming soon

 

they are standard

 

Anyone

 

No one..... ?

 

Be patient. Standard cut were only used for a couple years in the LP30, so much lower demand. Try some TJ forums also, they use these gears.

 

yeah true, ima try that then

 

not true.. Tjs pinion is diffrent. They used a "Short Pinon" LP D30

 

yeah well i actually have no idea weather its an xj axle or tj axle now that i think about it, i originally bought this axle off craigslist and decided to sell the gears because the housing and tubes had some issues, so i decided to take the gears out because they're in amazing shape and i wanted to get a couple dollars back from the loss i took

 

try to find a part number on them and look them up. Im kinda in a similar situation. that's how I found out there is a difference. I bought a Cherokee housing with 4.10s to put in my 97 tj d30 and I found out the pinion was about a inch to two long and wouldn't work in the tj housing.

 

i was just reading that '00-'06 TJ gears are the same as '00-'01 XJ gears and '00-'04 WJ D30 axle, so anything before '00 seems to be different, so that might have been your issue

 

But im gunna keep looking into it to make sure

 

yea that makes since.....

 

Seems actually that tj lp and wj lp axles are the same, so your right about the short pinion deal